FOR RETROFITS Easily upgrade to LED.
Direct Wire
WATCH VIDEO
Always put safety first. Shut o live power source(s) before beginning installation and make sure you’re wearing proper safety equipment.
Designed for Speed. Built for Signs.
➊ Open old sign cabinet and remove existing tubes.
➋ Cut input and output wires on ballast.
➌ Mount tubes in existing sockets or use spring- loaded brackets (available as accessories) if sockets are unable to hold lamp.
➍ Bypass the ballast and connect power directly to leader cable.
➎ Connect the leader cable to the first tube. Connect wire end of leader cable to 120V line input.
➏ Connect lamps together with waterproof cables.
➐ Add sealing cap to last lamp in run.
➑ Adjust Power Select and Color Select outputs to your desired settings.
➒ Turn on power. Your installation is now complete.
LIT-SS-SIGNHERO-DW-INSTALL
keystonetech.com
Powered by FlippingBook