FOR NEW CONSTRUCTION
Install in minutes.
WATCH VIDEO
Always put safety first. Be aware of your surroundings and make sure you’re wearing proper safety equipment.
➊ Mark where lamps should go. See diagram below for typical spacing recommendations.
➋ Install mounts on top and bottom of
cabinet interior. Install Keystone spring-loaded brackets (accessory) on top and bottom.
➌ Place each tube in installed mounts.
➍ Connect leader cable to incoming power (120-277V). Leader cable sold separately.
➎ Connect leader cable to first lamp’s connector.
➏ Connect lamps together with waterproof cables. You can power up to 150’ on a single feed.
➐ Add sealing cap to last lamp in run.
➑ Adjust Power Select and Color Select outputs to your desired settings.
12” apart
TYPICAL SPACING
➒ Turn on power to test proper illumination. If acceptible, your installation is complete.
6” from the face
keystonetech.com
Powered by FlippingBook