Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
EconoComp System Specifications
Moldings (Retainers)
Econo Molding Part #2056
Molding Screw Part #5290
1-1/16”
1/4” Joiner Bracket Slot
1-5/16”
1-1/8”
Corner Key Part #5210
Corner Key Part #5210
Hanging Bar Tab
Inner Flange
.250” Opening
Extended Econo Molding Part #2058
Molding Screw Part #5290
2-5/8”
1/4” Joiner Bracket Slot
5/8”
1-5/16”
1-1/8”
Corner Key Part #5210
Corner Key Part #5210
Corner Key Part #5210
Hanging Bar Tab
Inner Flange
.250” Opening
Divider
Isometric Back View
1-5/16” Econo Divider Part #2140
1-1/16”
Divider Angle Part #5325 (for use with Econo Molding Part #2056)
.258” Opening
Extended Molding Part #2058
Inner Flange
1-5/16”
Extended Divider Angle Part #5335 (for use with Extended Molding Part #2058)
Approx. 1/8”
Divider Angle Part #5325
9/16”
Notch Extended Molding back leg to accommodate Extended Divider Angle
Extended Divider Angle Part #5335
Note: 1-5/16” Econo Divider is engineered for use with the Econo Molding. For use with the Extended Econo Molding, attach the Econo Divider to the Inner Flange using the Extended Divider Angle, part #5335 as noted and shown above.
97
Powered by FlippingBook