Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
EconoComp System Specifications Sign Cabinet Fillers (Bodies)
Molding Screw Part #5290
6-13/16”
Large Double Face Filler Part #2032 Econo Molding Part #2056
1/4” Joiner Bracket Slot
Corner Key Part #5210
Corner Key Screw Part #5217
5-1/4”
Note: It is recommended to cut fillers and moldings 1” over nominal T12 or T8 lamp length to utilize .040 flat aluminum raceway covers.
Raceway Cover (See components on page 94)
Molding Screw Part #5290
2-13/16”
Medium Double Face Filler Part #2036 Extended Econo Molding Part #2058
1/4” Joiner Bracket Slot
1-7/16”
Corner Key Part #5210
Corner Key Screw Part #5217
Raceway Cover Part #5085
Molding Screw Part #5290
5-3/8”
Single Face Filler Part #2034 Econo Molding Part #2056
1/2”
1/4” Joiner Bracket Slot
Corner Key Part #5210
3/16” Pop Rivets (four (4) per Corner)
Corner Key Part #5210
4-3/16”
1-1/16”
Note: It is recommended to cut fillers and moldings 1” over nominal T12 or T8 lamp length to utilize .040 flat aluminum raceway covers.
.040 Back
Raceway Cover Tab
Raceway Cover (See components on page 94)
Single Face Filler (back)
7/16”
Corner Key Part #5210
3/16” Pop Rivets (four per Corner Key)
.040 Pre-Painted white aluminum back (by fabricator)
Raceway Cover Tab
.125”
Note: See page 94 for all body components.
96
Powered by FlippingBook