Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Standard System Specifications
Wall Frames 3/4” Wall Frame Part #1948
1-3/8” Wall Frame Part #1949
3/4”
1/2”
.392” Opening
.198” Opening
1-7/8”
2-1/16”
1/2”
1-3/8”
3/4”
Corner Key Part #5210
1-1/8”
The vertical frames are pre-drilled and countersunk
Corner Key Part #5210
Moldings
1-3/8” L-Molding Part #1943
1” H-Molding Part #1945
1” Z-Molding Part #1946
1.5” Z-Molding Part #1947
3/4”
3/4”
1-3/8”
3/8”
1-3/4”
1-7/16”
1-1/2”
2-1/4”
1”
1”
1” Tube
1-1/2”
Corner Key Part #5210
Standard Angle
5/16”
.241” Opening
.241” Opening
.241” Opening
Socket Raceways Large Socket Raceway Part #1983 Socket Raceway Cover Part #1987
Socket Raceway Part #1984 Socket Raceway Cover Part #1987
Socket Raceway II Part #1985 Socket Raceway Cover Part #1987
Button or Tombstone Type Socket
Button or Tombstone Type Socket
Standard 1/2” Electrical Fitting
Button or Tombstone Type Socket
1” x 1” x 1/8” x 1/2” Aluminum angle for mounting. (Optional)
1-11/16”
1-1/4”
1-1/4”
.875” Opening
1-7/8”
1-7/8”
2”
Ballast / Power Supply Raceway Ballast Raceway Part #1969
5-1/16”
Ballast / Power Supply
4-3/8”
.040 Aluminum Raceway Cover Raceway Cover Screw Part #5290
3-7/16”
2-1/16”
1-7/16”
Electrical Fitting
Ballast / Power Supply Mounting Bolt
1/2”
89
Powered by FlippingBook