Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Standard System Specifications
Standard Dividers 1-1/2” Divider Part #1910
2Part Divider Part #1905 Dividers
2-1/2” Divider Part #1920
.251” Opening
1”
1”
11/16”
1-5/8”
1-3/16”
1-1/2”
11/16”
2-1/2”
5/16”
.300” Opening
Divider Angle Part #5300
.300” Opening
Vandal Systems with Headers
2Part Large Extended Retainer Part #1939 2Part Large Vandal System Parts #1959 and Part #1941
2Part Extended Retainer Part #1940 2Part Vandal System Parts #1960 and Part #1942
4-1/16”
2-3/4”
.250” Opening
.250” Opening
3/16”
3/4”
3/16”
2Part Extended Retainer Part #1940
1-5/8”
2”
2Part Large Extended Retainer Part #1939
Retainer Screw Part #5290 or 3/8” x 3/16” Pop Rivet 2Part Inner Frame Part #1960
3-5/8”
4-13/16”
Retainer Screw Part #5290 or 3/8” x 3/16” Pop Rivet
2”
2-13/16”
2Part Large Inner Frame Part #1959
2Part Outer Frame Part #1942
2Part Large Outer Frame Part #1941
Isometric Back View
2Part Vandal System Parts #1960 and Part #1942 2Part Vandal System Parts #1960 and Part #1942 Vandal to Vandal Systems (Menu Boards) 2Part Large Vandal System Parts #1959 and Part #1941 2Part Large Vandal System Parts #1959 and Part #1941
4”
5-5/8”
Note: It is recommended to use safety chains and prop-bars on hingeable faces.
86
Powered by FlippingBook