Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Sign Cabinet Bodies Standard System Specifications
Retainer Screw Part #5290
8-1/2”
2Part 12” Double Face Body Part #1929 2Part Retainer Part #1944
1/4” Body Corner Angle Part #5977
Corner Key Part #5210
7-3/4”
12”
1Part 12” Double Face Body Part #1924
1-5/8”
Note: It is recommended to cut bodies and retainers 1-3/4” over nominal T12 or T8 lamp length to utilize .040 flat aluminum raceway covers.
Corner Key Part #5210 (Optional)
Ballast Pan Part #5970
Ballast Pan Screw Part #5290
Corner Key Part #5210
Retainer Screw Part #5290
5-1/2”
2Part 9” Double Face Body Part #1928 2Part Retainer Part #1944
4-3/4”
3/8”
Corner Key Part #5210
Corner Angle Screw Part #5218
1/4” Body Corner Angle Part #5978
9”
1Part 9” Double Face Body Part #1923
1-5/8” 1”
Corner Key Part #5210 (Optional)
Note: It is recommended to cut bodies and retainers 1-3/4” over nominal T12 or T8 lamp length to utilize .040 flat aluminum raceway covers.
7/16” Bolt
.313” Opening
1/4” Steel Mounting Plate
Retainer Screw Part #5168 (optional)
Retainer Screw Part #5290
2-1/2”
2Part 6” Double Face Body Part #1936 2Part 6” Double Face Retainer Part #1954
Corner Key Part #5210
3/8”
1/4” Body Corner Angle Part #5985
Corner Angle Screw Part #5218
6”
1Part 6” Double Face Body Part #1931
1-5/8”
1/4" Joiner Bracket
Note: It is recommended to cut bodies and retainers 1” over nominal T12 or T8 lamp length to utilize .040 flat aluminum raceway covers.
2-3/16”
Raceway Cover Tab
.313” Opening
Note: Attach the 1/4” steel mounting plate above the inner body flanges to increase structural connection. Note: See page 77 for all body components.
84
Powered by FlippingBook