Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Standard System Accessories
Part Number
Price Each
Part
Components
5080
D-Punch Assembly
$ 451.63
5905
Edge Lit LED 1/2 Round Cap 3-1/4” x 1-9/16” x .090 Edge Lit LED 1/4 Round Cap 2-3/16” x 1-9/16” x .090 Snap Frame Radius Cover Spring 1-1/16” x 1-1/16” x .010 Stainless Steel Snap Frame Flat Cover Spring 1” x 1” x .010 Stainless Steel
7.13
7.13
5903
5892
0.35/ea
5893
0.35/ea
2Part Lock For use with Parts #1942/#1960 2Part Large Lock For use with Parts #1941/#1959
5994
14.57
14.95
5993
2Part Large Hinge 1-1/2” x 96” x .063 Aluminum Hinge 2Part Hinge 1-1/16” x 96” x .060 Aluminum Hinge 2Part Lock Wrench For use with 2Part Lock Part #5994
5992
12.01
33.80 52.98 23.66 42.59
5997 5997P 5996 5996P
**
**
Gas Support Included: (2) Gas Supports/Ball Stud Mounting Brackets (4) 10mm Ball Studs Screws for mechanical fastening
5934-Kit
87.23
Designed for SignComp Large Vandal only. Not recommended with other systems. Call Customer Service for specific gas support size and poundage.
Hardware
2Part 6” D/F Retainer Screw Pre-drill and countersink 1/8” holes 12” o/c #8 x 1/2” stainless steel square/phillips drive countersink screw - Type A
5168 *5168P
12.00/100 28.00/100
2Part Retainer Screw 2Part Extended Retainer Screw
5290 5290P
12.00/100 28.00/100
*
1Part 2Part Corner Angle Screw Pre-drill 5/32” holes four (4) per body corner Divider Angle Screw Two (2) per end #10 x 1/2” stainless steel square/phillips drive pan head screw - Type AB Raceway Cover Screw Pre-drill 1/8” holes 12” o/c Raceway End Cap Screw #8 x 1/2” steel zinc square/phillips drive pan head screw - Type A 2Part Extended Retainer Corner Screw Pre-drill and countersink 1/8” holes one (1) per corner #8 x 3/4” stainless steel square/phillips drive countersink screw - Type A Wall Frame Corner Screw Pre-drill #6 countersink hole one (1) per corner #6 x 3/4” stainless steel square/phillips drive countersink screw - Type A 2Part Outer Frame Corner Angle Screw Pre-drill and countersink 1/8” holes two (2) per corner angle #8 x 3/8” stainless steel square/phillips drive countersink screw - Type A LED Cap Screw #6 x 3/8” stainless steel square/phillips drive countersink screw - Type A
5218 30.00/100
5241 *5241P
10.00/100 24.00/100
5245 10.00/100
5990 10.00/100
5940 9.00/100
5945 10.00/100
LED Spring Pin Drill 5/64” holes through face 12” o/c 3/32” x 5/8” Stainless Steel
*Pre-painted Dark Bronze **Pre-painted Dark Bronze Anodized
78
Powered by FlippingBook