Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Architectural System Specifications
Hingeable Retainers and Divider
Framed Face Retainers
Flush Face Retainers
1-1/8”
1-1/4”
1-1/4”
1/8”
1-1/4”
3/4”
Corner Key Part #5210
Corner Key Part #5210
Corner Key Part #5226
Corner Key Part #5210
1-7/16”
1-5/16”
1-7/16”
Varies
.115” to .125”
Up to 3/16” face material
Up to 3/16” face material
.200” Opening
Bond
Bond
.200” Opening
Frameless Retainer Part #1631
Bleed Retainer Part #1632
Slide Retainer Part #1624
3/4” Slide Retainer Part #1626
1-1/4”
1-1/4”
1-1/8”
7/8”
7/8”
3/4”
1/8”
1-1/4”
Corner Key Part #5210 Corner Key Part #5226
Corner Key Part #5210
Corner Key Part #5210
Corner Key Part #5210
1-7/16”
1-7/16”
1-7/16”
1-5/16”
Bond
Bond
1-1/4” Divider Tab Shelf
Up to 3/16” face material
Frameless Cover Part #1693 Access Frame Part #1690
Bleed Cover Part #1692 Access Frame Part #1690
Radius Slide Cover Part #1695 Access Frame Part #1690
Slide Cover Part #1694 Access Frame Part #1690
Framed Face Divider
Isometric Back View
Up to 3/16” face material
1-1/4”
1-1/4” Divider Tab Part #5308
9/16”
.200” Opening
1-1/4” Divider Part #1662
Monolithic Edges
3”
2-7/16”
2”
3”
2-15/16”
2”
2-3/8”
2”
1-1/2”
1-1/2”
o 90
o 60
o 60
o
90
o 60
1-1/2”
1-1/2”
2”
1-1/2”
1-1/2”
2” Radius Edge Part #1880
2-1/2” Radius Edge Part #1870
Sharp Edge Part #1850
3” Radius Edge Part #1890
1-1/2” Radius Edge Part #1860
2” x 2” Aluminum Angle Part #2183
.129” to .141 ”
Bonding Agent
Aluminum Sheet
Brakeform Aluminum Bracing
.125 Aluminum Sheet
Tack Weld
Note: It is recommended to use safety chains and prop-bars on hingeable faces.
65
Powered by FlippingBook