Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Architectural System Specifications
Radius Edge Face Retainers Hingeable Retainers
Extended 1/4 Round Retainer Part #1650
1/4 Round Retainer Part #1640
1”
2-3/4”
5/8”
1-1/2”
Corner Key Part #5210
Extended 1/4 Round Retainer Corner Angle Part #5325
1-1/4”
Corner Key Part #5210
1-1/4”
Bond
.114” to .126”
.114” to .126”
Bond
Extended 1/4 Round Retainer with Reveal *Part #1655
3”
Extended 1/4 Round Retainer Corner Angle Part #5325
4-1/8”
1”
Corner Key Part #5210
1-1/4”
Note :
The Hingeable Retainers are designed to integrate with all of the Architectural Hinge Bodies. See page 63 for more information.
Bond
.114” to .126”
Bleed Pan Face Retainer Frameless Rigid Retainer Part #1628 2” 5/16” 1-3/16”
Beveled Edge Face Retainer
Beveled Retainer Part #1656
4”
Corner Key Part #5210
3-1/8”
Extended 1/4 Round Retainer Corner Angl e Part #5325
1”
Rigid Retainer Hardware Part #5285
1/8”
Corner Key Part #5210
1-1/4”
.114” to .126”
Bond
*Available in mill run only
Note: It is recommended to use safety chains and prop-bars on hingeable faces.
64
Powered by FlippingBook