Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Architectural System Specifications
Hingeable 7” Post and Panel Systems
1 Reveal
1 Body See below
10 Retainers See page 64-65
7”
4-3/8”
1-1/2”
Series 7 Reveal Part #1550
Series 7 Hinge Body and Bleed Retainers
One Reveal Shape: Easily attaches to the Hinge Body Delivers three (3) reveal positions Fills the post below the panel
Three Reveal Positions 0”, 1/2” & 1”
7”
3 Posts
7”
7”
5-1/8”
3”
3-1/2”
Triangular Post Part #1530
Radius Post Part #1500
Rectangular Post Part #1510
Hingeable Sign Cabinet Bodies
Series 12 Hinge Body Part #1612 (Section view through top)
9-3/16”
Water Relief Channel
Ballast Bracket Slot
1/4” Joiner Bracket Slot
7-1/2”
Corner Angle Screw Part #5218
Corner Key Part #5210
1/4” Corner Angle Part #5342
Series 7 Hinge Body Part #1592 (Section view through top)
4-1/4”
Ballast Bracket Part #5102
1/4” Corner Angle Slot
3-1/4”
Raceway Cover Tab
Inner Body Flanges
Series 7 Single Face Body Part #1602 (Section view through top)
Series 7-12 Retro Body Part #1600 (Section view through side/bottom)
Attachment Fastener (Not provided)
1/8”
4-5/8”
1-7/16”
Ballast Bracket Slot
1-1/4”
Existing Structure, Angle or Tubing
Raceway Cover Part #5122
1-1/2”
3-1/4”
Back
Raceway Cover Tab
Hinge Screw Part #5280
Closure Screw Part #5230
Raceway Cover Screw Part #5290
.110”
Note: See page 46 for all body components.
Note: It is recommended to use safety chains and prop-bars on hingeable faces.
63
Powered by FlippingBook