Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Architectural System Accessories
Price Each
Part Number
Part
Hardware
Cap Screw #10 x 1/2” stainless steel square/phillips drive countersink screw - Type A
5040 *5040P
$16.00/100 24.00/100
Copy Bar Screw Pre-drill and countersink 1/8” holes two (2) per end Access Frame Cover Screw Pre-drill and countersink 1/8” holes 12” o/c Divider Tab Screw Pre-drill 1/8” holes two (2) per Divider #8 x 1/2” stainless steel square/phillips drive countersink screw - Type A
5168
12.00/100
Reveal to Body Screw Pre-drill 5/32” holes 12” o/c Corner Angle Screw
30.00/100
5218
Pre-drill 5/32” holes four (4) per body corner Panel Adaptor Attachment Screw Pre-drill 5/32” holes 6” o/c #10 x 1/2” stainless steel square/phillips drive pan head tapping screw w/ wax - Type AB
24.00/100
5230
Closure Screw Pre-drill and countersink 5/32” holes along bottom and sides of retainer 36” o/c #10 - 24 x 7/8” stainless steel square/phillips drive countersink machine screw
*
24.00/100 33.00/100
5240 5240P
Slide Body Corner Screw Pre-drill and countersink 5/32” holes two (2) per corner on horizontals #10 -24 x 3/4” stainless steel square/phillips drive countersink thread cutting screw - Type F
5241
Series 3,1/2 Slide Body Corner Screw Pre-drill and countersink 1/8” holes two (2) per corner on horizontals 2” Beveled Frame Corner Screw Pre-drill and countersink 1/8” holes two (2) per corner on horizontals #8 x 3/4” stainless steel square/phillips drive countersink screw - Type A
10.00/100
Slide/Insert Retainer Corner Screw Pre-drill and countersink 1/8” holes two (2) per corner on horizontals Access Frame Corner Screw Pre-drill and countersink 1/8” holes two (2) per corner Access Body Corner Screw Pre-drill and countersink 1/8” holes two (2) per corner on horizontals #8 x 1-1/2” stainless steel square/phillips drive countersink screw - Type A
24.00/100
5270
Hinge Screw Pre-drill 5/16” holes through the retainer along top 18” o/c #10 - 24 x 5/8” stainless steel allen head machine screw
30.00/100
5280
Rigid Retainer Hardware Pre-drill and countersink 9/32” holes along all sides 18” o/c 1/4”-20 x 1” stainless steel square drive countersink machine screw/bushing/lock nut
1.06/ea
5285
Raceway Cover Screw Pre-drill 1/8” holes 24” o/c #8 x 1/2” steel zinc square/phillips drive pan head screw - Type A
12.00/100
5290
*Pre-painted Dark Bronze
48
Powered by FlippingBook