Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Specifications
Note: It is recommended to cut bodies and retainers 1” over nominal T12/T8 lamp length to utilize .040 flat aluminum raceway covers for Part #2009, #2010, #2008 and #2007. Contact Customer Service for Part #2027.
Sign Cabinet Bodies without Reveal Flat 2 Piece Double Face Body Part #2009
16”
Weldment
1/4” Joiner Bracket Slot
13-13/16”
Corner Angle Screw Part #5218
Flat 2 Piece Double Face Medium Body Part #2010
1/4” Body Corner Angle Part #5909
12”
Weldment
1/4” Joiner Bracket Slot
9-13/16”
Flat Body Hinge/ Closure Screw Part #5178
1/4” Body Corner Angle Part #5910
Flat Double Face Body Part #2008
9”
1/4” Joiner Bracket Slot
6-13/16”
Corner Angle Screw Part #5218
1/4” Body Corner Angle Part #5908
Flat Double Face Medium Body Part #2007
4-1/4”
2-1/4”
1/4” Joiner Bracket
1/4” Body Corner Angle Part #5907
Flat Single Face Body Part #2027
6-1/16”
5”
.064” opening
1/4” Body Corner Angle Part #5327
Flat Single Face Body Corner Angle Screw Part #5199
Back
Flat Retro Body Part #2041
Flat Wall Mount Retro Body Part #2042
13/16”
1-13/16”
1”
2-3/16”
1/4” Corner Angle Part #5305
1/4” Corner Angle Part #5305
Note: See page 12 for all body components.
Note: Attach the 1/4” steel mounting plate above the inner body flanges to increase structural connection. It is recommended to use safety chains and prop-bars on all hingeable faces.
US Patent Numbers 9,208,701 / 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
24
Powered by FlippingBook