Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Specifications
Note: It is recommended to cut bodies and retainers 1” over nominal T12/T8 lamp length to utilize .040 flat aluminum raceway covers for Part #2005, #2015 and #2025.
Sign Cabinet Bodies with Reveal
3/8” Oversized Hole
1/2”
10-3/4”
Wide Body Part #2005 (Section view through top)
Ballast Bracket Slots
1/4” Joiner Bracket Slot
8-7/16”
Hinge Screw Part #5170
Water Relief Channel
Corner Angle Screw Part #5218
Inner Body Flanges
1/4” Body Corner Angle Part #5312
7-1/2”
Medium Body Part #2015 (Section view through top)
1/4” Joiner Bracket 1/4” Steel Mounting Plate
1/4” Body Corner Angle Slot
5-3/16”
Raceway Cover Tab
Inner Body Flanges
7/16” Mounting Bolt
1/4”
6-3/16”
Single Face Body Part #2025 (Section view through top)
Ballast Bracket Part #5096
Raceway Cover Part #5112
3-15/16”
.177”
Raceway Cover Screw Part #5290
1/2”
Closure Screw Part #5180
2-13/16”
Narrow Single Face Body Part #2021 (Section view through side/bottom)
1/4” Joiner Bracket Slot
1-3/8”
1/4” Body Corner Angle Part #5321
5/8”
1-1/16”
Slimline Single Face Body Part #2020 (Section view through side/bottom)
1/4” Body Corner Angle Part #5320
Back
1-13/16”
Retro Body Part #2040 (Section view through side/bottom)
1-11/16”
1-1/2”
Note: See page 12 for all body components.
Note: Attach the 1/4” steel mounting plate above the inner body flanges to increase structural connection. It is recommended to use safety chains and prop-bars on all hingeable faces.
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
23
Powered by FlippingBook