Extrusion Solutions for the Sign Industry available at Glantz.
CURRENT PRICE as of April 1, 2022
Sign Extrusions and Systems
Product Guide
Volume 2.4
WE CAN HELP BUILD YOUR NEXT SIGN Tell us a little bit about your project and we will send you the right Signcomp product list. Get Started
Request a Quote
Index - Extrusion Solutions for the Sign Industry
COMMERCIAL
Extrusions by the Length Sign Cabinet Bodies Hingeable Retainers and Covers
pages 4-10
8 9 9 9 10
Retro Tension Frames and Covers Retro Fascia Frames and Cover Wall Mount Tension Frames and Covers Compression Reinforcement Soft Signage Frames and Covers
4 5-6
Dividers / Hingeable Vandal Systems Radius Ends Tension Bodies and Covers
6 7 7
System Accessories
pages 11-13
11
11-13
Radius Corners
Components / Hardware
System Configurations System Specifications Sign Cabinet Bodies
pages 14-22 pages 23-36
23-24 25-26
31 32-33 33 34 35-36
Tension Bodies and Covers Retro / Tension Frames and Covers Retro Fascia Frames and Cover Wall Mount Tension Frames, Covers and Tools Soft Signage Frames and Covers
Hingeable Retainers and Covers Dividers Hingeable Vandal Systems Hingeable Retainer for Insert Panels Radius Ends
27 28 29 30
Flexible Face Preparation / Extrusion Guidelines Frame Brace and Frame Support Tube Placement
page 37 page 38
ARCHITECTURAL
Extrusions by the Length
pages 40-45
40 40 40-42
43 44 45
Sign Cabinet Bodies / Retainers and Covers / Divider Insert Panel Systems Monolithic Edges / Radius Ends
Series 1 Posts / Copy Bars and Reveal Panel Adaptors / Reveal and Fillers Post and Panel Systems - Series 2, 3, 4 & 7
System Accessories
pages 49-56 pages 46-48 pages 57-67
System Configurations System Specifications
63-65 65 66 67
57-58 58-61 60 62-63
Hingeable Sign Cabinet Bodies / Retainers / Dividers Monolithic Edges Insert Panel Systems Radius Ends
Series 1 Post and Panel / Copy Bar Systems Post and Panel Systems - Series 2, 3, 4 & 7 Panel Adaptor Systems Non-Hingeable / Hingeable Post and Panel Systems
RTS Post & Panel System
page 68
S T A N D A R D Extrusions by the Length
pages 70-76
70 71 71 71
72 72 72 73-76
Wall Frames Standard Moldings Socket and Ballast Raceways Channel Letter Raceways
Sign Cabinet Bodies / Retainers Dividers / Vandal Systems Edge Lit LED Snap Frames and Covers
System Accessories
pages 79-83 pages 76-78 pages 84-90
System Configurations System Specifications
84-85 86 86-87 88
89 90-91 92
Wall Frames / Moldings / Raceways Channel Letter Raceway Systems Channel Letter Raceway Splicing Guidelines
Sign Cabinet Bodies / Retainers Dividers Vandal Systems Edge Lit LED Systems / Snap Frame Systems
E C O N O C O M P
page 94
Extrusions by the Length
94
Sign Cabinet Fillers / Moldings / Divider
System Accessories
page 95 page 94
System Configurations System Specifications
pages 96-97
96
97
Sign Cabinet Fillers
Moldings / Divider
page 99 page 98
Cutting Services
Additional Information
Commercial Products
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Extrusions Priced by the Length
Part Number
Dk. Bronze
Part
Mill Finish
Length
Sign Cabinet Bodies With Reveal
Wide Body
2005
24’-6”
$550.25 $746.82
Cost per Foot
22.46
30.48
Medium Body
2015
24’-6”
358.35 492.23
Cost per Foot
14.63
20.09
Single Face Body
2025
24’-6”
241.60 334.87
Cost per Foot
9.86
13.67
Narrow Single Face Body
24’-6”
200.82 278.33
2021
Cost per Foot
8.20
11.36
2020
24’-6”
122.25 169.41
Slimline Single Face Body
Cost per Foot
4.99
6.91
2040
24’-6”
86.63
N/A
Retro Body
Cost per Foot
3.54
N/A
Without Reveal
Flat 2 Piece Double Face Body
2009
24’-6”
301.85
N/A
Cost per Foot
12.32
N/A
Flat 2 Piece Double Face Medium Body
2010
24’-6”
257.42
N/A
Cost per Foot
10.51
N/A
Flat Double Face Body
2008
24’-6”
399.48
N/A
Cost per Foot
16.31
N/A
Flat Double Face Medium Body
2007
24’-6”
285.56
N/A
Cost per Foot
11.66
N/A
Flat Single Face Body
2027
24’-6”
205.13
N/A
Cost per Foot
8.37
N/A
2042
24’-6”
119.09
N/A
Flat Wall Mount Retro Body
Cost per Foot
4.86
N/A
2041
24’-6”
116.57
N/A
Flat Retro Body
Cost per Foot
4.76
N/A
Extrusions available in full lengths and cut to size kits.
US Patent Number 9,208,701
4
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Extrusions Priced by the Length
Part Number
Mill Finish
Dk. Bronze
Part
Length
Hingeable Retainers and Covers For Rigid Plastic or Flush Aluminum Faces With Reveal 1-1/2” Retainer
2055
24’-6”
$95.95 $128.90
Cost per Foot
3.92
5.26
1-1/2” Retainer II
2053
24’-6”
130.49 176.21
Cost per Foot
5.33
7.19
1-1/2” Frame
2063 24’-6”
85.35
N/A
Cost per Foot
3.48
N/A
1-1/2” Frame Cover
2073
24’-6”
66.73
91.00
Cost per Foot
2.72
3.71
2-1/4” Retainer
2045
24’-6”
172.38 234.45
7.04
Cost per Foot
9.57
Without Reveal
Flat 1-1/2” Retainer
2052
24’-6”
132.68
N/A
Cost per Foot
5.42
N/A
2047
24’-6”
151.07
N/A
Flat 2” Retainer
Cost per Foot
6.17
N/A
Note: Part #2052 and #2047 are engineered to integrate with the Flat Bodies.
For Bleed Pan Form Faces
N/A N/A
Bleed Rigid Retainer
2048
24’-6”
122.33
Cost per Foot
4.99
N/A N/A
Flat Bleed Rigid Retainer
2204
24’-6”
124.69
Cost per Foot
5.09
Note: Part #2204 is engineered to integrate with the Flat Bodies.
For Insert Panels
N/A N/A
Commercial Access Frame
*2060
24’-6”
175.33
Cost per Foot
7.16
For Rigid Plastic or Flexible Faces
169.82
Dual Frame
2065
24’-6”
N/A
Cost per Foot
6.93
N/A
2-1/4” Dual Frame Cover
2075
24’-6”
83.24 113.48
Cost per Foot
3.40
4.63
Extrusions available in full lengths and cut to size kits.
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
*Part #2060 was engineered to integrate with Architectural System covers. See pages 43 and 44 for optional covers.
5
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Extrusions Priced by the Length
Part Number
Mill Finish
Dk. Bronze
Part
Length
For Flexible Faces
$227.41
Tension Frame II
2086
24’-6”
N/A
Cost per Foot
9.28
N/A
Tension Frame
2085
24’-6”
175.36
N/A
Cost per Foot
7.16
N/A
Bleed Tension Frame Cover (For use with Part #2086 and #2085) 2095
24’-6”
71.47
52.63
Cost per Foot
2.15
2.92
1-1/2” Tension Frame Cover (For use with Part #2086 and #2085) 2084
24’-6”
77.70 105.56
Cost per Foot
3.17
4.31
Dividers For Rigid Plastic Faces
2133
24’-0”
90.79 123.71
1-1/2” Divider (For use with Part #2053)
Cost per Foot
3.78
5.15
2” Divider
2138
24’-0”
130.59 177.97
Cost per Foot
5.44
7.42
Flat 2” Divider
2130
22’-3”
157.57
N/A
Cost per Foot
7.08
N/A
2-3/4” Divider
2128
24’-0”
265.38
192.57
Cost per Foot
8.02
11.06
N/A N/A
1-1/4” Divider
1662
24’-0”
76.85
Cost per Foot
3.20
Insert Divider
16’-0”
63.78
N/A N/A
1668
Cost per Foot
3.99
For Rigid Plastic and/or Flexible Faces
Dual Divider
2142
24’-0”
242.07
N/A
Cost per Foot
10.09
N/A
2-1/2” Dual Divider Cover
2146
24’-0”
45.75 61.75
Cost per Foot
1.91
2.57
Hingeable Vandal Systems
Inner Frame Retainer
2099
24’-6”
148.63 212.01
Cost per Foot
6.07
8.65
81.54
2Part Outer Frame
1942
24’-6”
106.59
Cost per Foot
3.33
4.35
Large Inner Frame Retainer
2097
24’-6”
360.09
252.20
Cost per Foot
10.29
14.70
2Part Large Outer Frame
1941
24’-6”
184.18 240.73
Cost per Foot
7.52
9.83
Extrusions available in full lengths and cut to size kits.
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
6
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Extrusions Priced by the Length
Part Number
Mill Finish
Dk. Bronze
Part
Length
Radius Ends
6” Radius 1/4 Round End
1671
24’-6”
$315.05
N/A
Cost per Foot
12.86
N/A
6” Radius 1/4 Round Pole Cover
1672
24’-6”
315.05
N/A
Cost per Foot
12.86
N/A
8-1/2” Radius 3 Part End
1673
24’-6”
315.05
N/A
Cost per Foot
12.86
N/A
Note: Part #1671 and #1672 require two (2) 1/4 Rounds to make one half round. Part #1673 requires three (3) 3 Part Ends to make one half round.
Tension Bodies and Covers For Flexible Faces
5” Flat Bleed Double Face Tension Body
2230
24’-6”
210.00
N/A
Cost per Foot
8.57
N/A
108.31
5” Flat Bleed Double Face Tension Cover
N/A
4.42
6” Flat Bleed Single Face Tension Body
2233
24’-6”
442.91
N/A
Cost per Foot
18.08
N/A
6” Flat Bleed Single Face Tension Cover
2238
24’-6”
109.30
N/A
Cost per Foot
4.46
N/A
Extrusions available in full lengths and cut to size kits. Radius Ends available in full lengths only.
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
7
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Extrusions Priced by the Length
Part Number
Mill Finish
Dk. Bronze
Part
Length
Retro Tension Frames and Covers
For Flexible Faces
2” Retro Frame
2112
24’-6”
$194.29
N/A
Cost per Foot
7.93
N/A
2-3/8” Retro Frame Cover (For use with Part #2112 and #2105) 2115
24’-6”
92.98 127.04
Cost per Foot
3.80
5.19
Bleed Retro Frame
2105
24’-6”
N/A
168.58
Cost per Foot
6.88
N/A
Bleed Retro Frame Cover
2122
24’-6”
60.72
81.28
Cost per Foot
2.48
3.32
Flat Bleed Retro Frame w/ Reflector Slot
2103
24’-6”
174.69
N/A
Cost per Foot
7.13
N/A
Flat Bleed Retro Frame
2104
24’-6”
175.36
N/A
Cost per Foot
7.16
N/A
Flat Bleed Retro Frame II
2107
24’-6”
N/A
206.63
Cost per Foot
8.43
N/A
Flat Bleed Retro Frame Cover (For use with Part #2103, #2104 and #2107) 2121
24’-6”
46.71
N/A
Cost per Foot
1.91
N/A
Extended Flat Bleed Retro Frame Cover (For use with Part #2103 and #2104) 2123
24’-6”
61.57
N/A
Cost per Foot
2.51
N/A
Extended Flat Bleed Retro Frame Cover II (For use with Part #2107)
2124
24’-6”
N/A
63.37
Cost per Foot
2.59
N/A
1-1/2” Flat Bleed Retro Frame Cover (For use with Part #2103 and #2104) 2125
24’-6”
N/A
94.71
Cost per Foot
3.87
N/A
1-1/2” Flat Bleed Retro Frame Cover II (For use with Part #2107)
2127
24’-6”
100.55
N/A
Cost per Foot
4.10
N/A
223.93
Wall Mount Frame (For use with Part #2104)
24’-6”
N/A
2100
Cost per Foot
9.14
N/A
Note: Part #2104 and #2107 are engineered to integrate with the Flat Bodies.
Extrusions available in full lengths and cut to size kits.
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
8
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Extrusions Priced by the Length
Part Number
Mill Finish
Dk. Bronze
Part
Length
Retro Fascia Frames and Cover For Flexible Faces
Bleed Fascia Frame
2092
24’-6”
$148.18
N/A
Cost per Foot
6.05
N/A
Bleed Fascia Frame Cover
2093
22’-3”
70.62
N/A
Cost per Foot
3.17
N/A
1-1/2” Fascia Frame
2094
24’-6”
123.56
N/A N/A
Cost per Foot
5.04
Wall Mount Tension Frames and Covers
For Flexible Faces
Front Load Wall Mount Tension Frame
2080
24’-6”
N/A
251.26
Cost per Foot
10.26
N/A
Front Load Wall Mount Tension Frame Cover
2078
24’-6”
N/A
50.73
Cost per Foot
2.07
N/A
Wall Mount Tension Frame
2090
24’-6”
N/A
180.87
Cost per Foot
7.38
N/A
Wall Mount Tension Frame Beveled Cover Wall Mount Tension Frame Square Cover
2091
24’-6”
61.57
N/A
Cost per Foot
N/A
2.51
2088
24’-6”
67.48
N/A
Cost per Foot
2.75
N/A
Wall Mount Tension Frame Radius Cover
2089
24’-6”
67.48
N/A
Cost per Foot
2.75
N/A
Compression Reinforcement
Front Load Wall Mount Tension Frame Support (For use with Part #2080)
2171
20’-0”
155.66
N/A
Cost per Foot
7.78
N/A
Frame Support Tube 3/4” x 1-5/8” Small Frame Support Tube 1” x 1”
2175
24’-0”
108.53
N/A
Cost per Foot
4.52
N/A
2177
24’-0”
N/A
88.05
Cost per Foot
3.67
N/A
Extrusions available in full lengths only. Wall Mount Tension Frame and Covers available in full lengths and kits.
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
9
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Extrusions Priced by the Length
Clear Anodized
Part Number
Mill Finish
Part
Length
Soft Signage Frames and Covers
For Fabric Faces
1-1/4” Soft Signage Frame
3090N 24’-5”
$113.23
N/A
Cost per Foot
4.64
N/A
1-1/4” Soft Signage Frame Plastic Cover
3093N 12’-2”
*35.51
N/A
Cost per Foot
2.92
N/A
2” Soft Signage Frame
3090
24’-5”
141.97
N/A
Cost per Foot
5.81
N/A
2” Soft Signage Frame Plastic Cover
3093
12’-2”
*39.49
N/A
Cost per Foot
N/A
3.25
1-1/4” Soft Signage Snap Frame
3091N 20’-0”
97.53
N/A
Cost per Foot
4.88
N/A
15.04
1-1/4” Soft Signage Snap Frame Cover
3094N 20’-0”
28.06
Cost per Foot
0.75
1.40
2” Soft Signage Snap Frame
3091
20’-0”
115.51
N/A
Cost per Foot
N/A
5.78
2” Soft Signage Snap Frame Cover
3094
20’-0”
17.45
32.91
Cost per Foot
1.65
0.87
107.32 5.37
1” Front Load Soft Signage Frame
80.64 4.03
139.71 177.17
3-1/2” Front Load Soft Signage Frame
3095
20’-0”
6.99
Cost per Foot
8.86
Soft Signage Support
3085 20’-0”
45.33
N/A
Cost per Foot
2.27
N/A
Grip Strip II (Polypropylene and TPE)
3097 12’-2”
*55.11
N/A
Cost per Foot
4.53
N/A
Front Load Grip Strip (Polypropylene and TPV) (Four (4) lengths needed per 20’ single face frame)
3098 10’-0”
*13.49
N/A
Cost per Foot
1.35
N/A
Z-Clip
3099 12’-0”
18.34
N/A
Cost per Foot
1.53
N/A
*Black finish
Extrusions available in full lengths and cut to size kits.
US Patent Numbers 8,595,966 CA Patent Numbers 2,754,507
10
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Part Price / box of four (4) assemblies Commercial System Accessories 6” 9” Part Number
Price / box of four (4) assemblies
Part Number
6”
9”
Part
Radius Corners For Rigid Plastic Faces 1-1/2” Retainer
For Flexible Faces Tension Frame w/ Bleed Tension Frame Cover
$460.65 Narrow S/F Body 6” 4465
Narrow S/F Body 6” 4485 $484.75
460.65 504.59
Single Face Body 6” 4565 9” 4560
Single Face Body 6” 4585 9” 4580
484.75 516.66
643.77 712.86
Medium Body 6” 4535 9” 4530
Medium Body
6” 4555 9” 4550
570.83 724.99
Wide Body
6” 4505 9” 4500
676.49 752.91
Wide Body
6” 4525 9” 4520
631.20 766.66
Note: Tension Frame Radius Corners are for use with Parts #2085/#2095, Bleed Tension Frame and Bleed Tension Frame Cover only. The Covers are injection molded polycarbonate, pre-primed black and ready for paint/top coating. For Flexible Faces Tension Frame II w/ Bleed Tension Frame Cover
Note: 1-1/2” Radius Corners are for use with Part #2055, 1-1/2” Retainer only. Body and retainers are cast aluminum.
For Rigid Plastic or Flexible Faces Dual Frame w/ 2-1/4” Dual Frame Cover
Narrow S/F Body 6” 4475 490.91
Narrow S/F Body 6” 4488 510.32
Single Face Body 6” 4575 9” 4570
490.91 525.01
Single Face Body 6” 4588 9” 4587
510.32 557.50
Medium Body
6” 4558 9” 4557
623.18 815.51
Medium Body 6” 4545 9” 4540
685.81 741.66
Wide Body
6” 4528 9” 4527
678.57 854.94
Wide Body
6” 4515 9” 4510
723.13 783.33
Note : Dual Frame Radius Corners are for use with either Part #2045, 2-1/4” Retainer or Parts #2065/#2075, Dual Frame with 2-1/4” Dual Frame Cover. The Covers are injection molded polycarbonate, pre-primed black and ready for paint/top coating.
Note: Tension Frame II Radius Corners are for use with Parts #2086/#2095, Tension Frame II and Bleed Tension Frame Cover only. The Covers are injection molded polycarbonate, pre-primed black and ready for paint/top coating.
Part Number
Price Each
Part
Components
$87.23
5934-Kit
Gas Support Included: (2) Gas Supports/Ball Stud Mounting Brackets (4) 10mm Ball Studs Screws for mechanical fastening
Designed for SignComp Large Vandal only. Not recommended with other systems. Call Customer Service for specific gas support size and poundage.
Note : The cast radius corner body is ground smooth and milled to fit the extrusion profile. Grind lines and imperfections are present. Some surface preparation may be necessary. Not ready for paint. All corners are mill finish and packaged four (4) per box, unless requested otherwise.
11
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Commercial System Accessories
Price Each
Price Each
Part Number
Part Number
Part
Part
Components
Wide Body Raceway Cover 10-1/4” x 48” x .040 (white) Blank Medium Body Raceway Cover 7-1/8” x 48” x .040 (white) Blank Single Face Body Raceway Cover 5-5/8” x 48” x .040 (white) Blank Wide Body Ballast Bracket 10-1/16” x 24” x .080 Medium Body Ballast Bracket 6-13/16” x 24” x .080 Single Face Body Ballast Bracket 5-9/16” x 24” x .080 Wide Body Corner Angle 1-3/4” x 1-3/4” x 1/4” (10-1/16”) Medium Body Corner Angle 1-3/4” x 1-3/4” x 1/4” (6-7/8”) Single Face Body Corner Angle 1-3/4” x 1-3/4” x 1/4” ( 5-9/16”)
5116 5114
$32.27 18.67 11.10
Corner Key 3-1/4” x 3-1/4” x .120 Stamped Aluminum 2 Piece Corner Key 1-3/8” x 1-3/8” x .200 Stamped Steel Flat 1-1/2” Retainer Corner Bracket Set
5210 $1.22
5112
5890
0.77
5092 5094
12.63 8.39 6.28
5213
5.15
5096
Flat 2” Retainer Corner Bracket Set
5214
6.13
5312
9.16
5350
2.55
Frame Brace 1-3/8” Pieces
5318
6.45
Small Frame Brace 1-1/8” Pieces Retro Frame Brace 1-1/8” Pieces
5352
1.81
5.79
5322
5354
2.26
5321
3.04
Narrow Single Face Body Corner Angle 1-3/4” x 1-3/4” x 1/4” (2-5/16”)
2 Piece Frame Brace 1” Pieces
5357
8.56
Frame Corner Angle 2” x 2” x 3/16” ( 9/16”) (For Part #2053) Divider Corner Angle w/ Notch 2” x 2” x 3/16” ( 9/16”) (For Part #2053) Front Load Wall Mount Tension Frame Corner Angle 1-3/4” x 1-3/4” x 1/4” ( 1-1/2”) Frame Corner Angle 1-3/4” x 1-3/4” x 1/4” ( 1-1/16”) Divider Corner Angle w/ Notch 1-3/4” x 1-3/4” x 1/4” ( 1-1/16”) 2Part Outer Frame Corner Angle 2” x 2” x 1/8” ( 3/8”) Corner Angle 2” x 2” x 3/16” ( 3/16”) Flat 2 Piece Double Face Body Corner Angle 2-1/2” x 2-1/2” x 1/4” (15-9/16”) Flat 2 Piece Double Face Medium Body Corner Angle 2-1/2” x 2-1/2” x 1/4” (11-9/16”) Flat Double Face Body Corner Angle 2-1/2” x 2-1/2” x 1/4” (8-9/16”) Flat Double Face Medium Body Corner Angle 2-1/2” x 2-1/2” x 1/4” (3-13/16”) Flat Single Face Body Corner Angle 2-1/2” x 2-1/2” x 1/4” (5-5/8”) Slimline Single Face/ 6” Tension Body Corner Angle 1-3/4” x 1-3/4” x 1/4” (7/8”)
5320
1.97
5909 16.16
Tension Clip 100 Count Bag
5360 118.00
5910
11.38
Tension Tool
5135 66.75
9.22
5908
Wall Mount Tension Tool
5137 66.75
4.75
5907
5138 66.75
Reverse Wall Mount Tension Tool
6.28
5327
0.35
2” Soft Signage Snap Cover Spring
5893
5304 5301 5305 5300
1.63 2.03 1.74 2.14
1-1/4” Soft Signage Snap Cover Spring
5894
0.35
Reversible Flexholder 500 Count Box
LP-1100 435.00
Wedge Clamp Sets 1-1/2” Bolt - 100 Count Box 2-1/2” Bolt - 100 Count Box Flexclamp 1-1/2” Bolt - 250 Count Box 2-1/2” Bolt - 250 Count Box
5365 5370
387.00 398.00
5323
2.10
5975 5303
1.74 1.10
FC FCSP
672.50 710.00
Teeth Clip 500 Count Box
FHU-CLIP 75.00
Insert Divider Tab 3/4” x 2” x .125” 1-1/4” Divider Tab 1” x 2-1/4” x .125”
5306
1.04
Stainless Steel Clip 250 Count Box
SSC-P 145.00
1.04
5308
2.45
3-1/2” Front Load Soft Signage Angle Assembly 2” x 2” x 1/4” (1/2”)
5895
Flat Divider Mounting Bracket 50 Count Box
5302 103.50
12
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Commercial System Accessories
Price Each
Price Each
Part Number
Part Number 5996 5996P 5997 5997P
Part
Part
Compression Gasket Self adhesive water exclusion gasket 50’ roll Front Load Soft Signage Pull Tab Assembly 2Part Hinge 1-1/16” x 96” x .060 Aluminum Hinge 2Part Large Hinge 1-1/2” x 96” x .063 Aluminum Hinge
$23.66 42.59
Components
**
2Part Lock For use with Parts #1942/#2099
5994 $14.57
33.80 52.98
**
2Part Large Lock For use with Parts #1941/#2097
5993 14.95
2.80
5897
5992 12.01
2Part Lock Wrench For use with Part #5994
18.56
5500
5080 451.63
D-Punch Assembly
6” Radius End Cap 1-1/4” Reveal Tab
24.36
5440
Price Each
Part Number
Part
Hardware
5168 $12.00/100
Access Frame Cover Screw Pre-drill and countersink 1/8” holes 12” o/c Flat Bleed Rigid Retainer Screw Pre-drill and countersink 1/8” holes four (4) per corner Divider Tab Screw Pre-drill 1/8” holes one (1) per divider end #8 x 1/2” stainless steel square/phillips drive countersink screw - Type A
Hinge Screw Pre-drill 3/8” holes through the retainer along top 36” o/c Dual Divider Cover Screw Pre-drill 3/8” holes through the cover 48” o/c 1/4”-20 x 1/2” stainless steel allen head machine screw
5170 49.00/100
Closure Screw Pre-drill 3/8” holes along sides and bottom of retainer 48” o/c 1/4”-20 x 3/4” stainless steel square/phillips drive pan head machine screw Cover Screw Pre-drill 1/8” holes 24” o/c Retainer Screw Pre-drill 1/8” holes in back through retainer into corner keys four (4) per corner Corner Bracket Screw Pre-drill 1/8” holes in bottom through retainer into corner brackets four (4) per corner #8 x 5/16” steel zinc square/phillips drive pan head screw - Type B Flat Body Hinge Screw Pre-drill 5/32” holes along top of retainer 36” o/c Flat Body Closure Screw Pre-drill 5/32” holes along sides and bottom of retainer 48” o/c #10 x 5/8” steel zinc square/phillips drive pancake head screw - Type B
5178 27.00/100
5180 33.00/100
5195 14.00/100
Wall Mount Tension Frame Cover Screw Pre-drill 1/8” holes 36” o/c #8 x 3/4” steel zinc square/phillips drive pan head screw - Type B Flat Single Face Body Corner Angle Screw Pre-drill 1/8” holes eight (8) per corner #8 x 3/8” steel zinc square drive pan head screw - Type B
5199 12.00/100
5215 35.00/100
5218 30.00/100
Corner Angle / Divider Angle Screw Pre-drill 5/32” holes Four (4) per body corner and two (2) per retainer corner / Two (2) per divider end Radius Corner Screw Four (4) per corner #10 x 1/2” stainless steel square/phillips drive pan head tapping screw w/ wax - Type AB Raceway Cover Screw Pre-drill 1/8” holes 24” o/c #8 x 1/2” steel zinc square/phillips drive pan head screw - Type A 2Part Large Hinge Screw Pre-drill and countersink 1/8” holes 3” o/c - first 18”, remainder 6-8” o/c 2Part Outer Frame Corner Angle Screw Pre-drill and countersink 1/8” holes two (2) per corner #8 x 3/8” stainless steel square/phillips drive countersink screw - Type A Rigid Retainer Hardware Pre-drill and countersink 9/32” holes 18” o/c 1/4”-20 x 1” stainless steel square drive countersink machine screw/bushing/lock nut Access Frame Corner Screw Pre-drill and countersink 1/8” holes two (2) per corner on verticals Flat Bleed Double Face Tension Cover Screw #8 x 1-1/2” stainless steel square/phillips drive countersink screw - Type A Inner Frame Retainer Screw Pre-drill and countersink 1/8” holes two (2) per corner #8 x 3/4” stainless steel square/phillips drive countersink screw - Type A
5241 *5241P
22.00/100 10.00/100
5270 24.00/100
1.06/ea
5285
5290 12.00/100
5990 10.00/100
*Pre-painted Dark Bronze **Anodized Dark Bronze
13
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Configurations with Reveal
Rigid Plastic or Flush Aluminum Faces
1-1/2” Retainer #2055
15”
Wide Body #2005
11-3/4”
Medium Body #2015
8-5/16”
Single Face Body #2025
4-15/16”
Narrow Single Face Body #2021
3-3/16”
Slimline Single Face Body #2020
3-15/16”
Retro Body #2040
Note: When bonding an aluminum face to the retainer, the overall dimension of the configurations may vary depending on the face thickness used.
1-1/2” Retainer II #2053
15”
Wide Body #2005
11-3/4”
Medium Body #2015
8-5/16”
Single Face Body #2025
4-15/16”
Narrow Single Face Body #2021
3-3/16”
Slimline Single Face Body #2020
3-15/16”
Retro Body #2040
Note: The overall dimension of the configurations when bonding an aluminum face to the retainer, may vary depending on the face thickness used.
14
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Configurations with Reveal
Rigid Plastic or Flush Aluminum Faces
2-1/4” Retainer #2045
17”
Wide Body #2005
13-3/4”
Medium Body #2015
9-5/16”
Single Face Body #2025
5-7/8”
Narrow Single Face Body #2021
4-3/16”
Slimline Single Face Body #2020
4-15/16”
Retro Body #2040
Note: The overall dimension of the configurations when bonding an aluminum face to the retainer, may vary depending on the face thickness used.
Dual Frame with 2-1/4” Dual Frame Cover #2065/#2075 Rigid Plastic Faces or Flexible Faces
17”
Wide Body #2005
13-3/4”
Medium Body #2015
9-5/16”
Single Face Body #2025
5-7/8”
Narrow Single Face Body #2021
4-3/16”
Slimline Single Face Body #2020
4-15/16”
Retro Body #2040
15 US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Configurations with Reveal
For Bleed Pan Form Faces
Bleed Rigid Retainer #2048
15”
Wide Body #2005
11-3/4”
Medium Body #2015
8-5/16”
Single Face Body #2025
4-15/16”
Narrow Single Face Body #2021
3-3/16”
Slimline Single Face Body #2020
3-15/16”
Retro Body #2040
Insert Panels
Commercial Access Frame with Insert Top/Bottom Cover #2060/#1292
17-3/16”
Wide Body #2005
13-15/16”
Medium Body #2015
9-3/8”
Single Face Body #2025
6”
Narrow Single Face Body #2021
4-5/16”
Slimline Single Face Body #2020
5-1/16”
Retro Body #2040
Optional Covers
#1692
#1693
#1694
#1695
Note: Part #2060 was engineered to integrate with Architectural System covers. See page 29 for optional covers.
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
16
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Configurations with Reveal
Tension Frame II Flexible Faces
with Bleed Tension Frame Cover #2086/#2095
17-3/16”
Wide Body #2005
13-15/16”
Medium Body #2015
9-3/8”
Single Face Body #2025
6”
Narrow Single Face Body #2021
4-1/4”
Slimline Single Face Body #2020
5”
Retro Body #2040
Tension Frame II with 1-1/2” Tension Frame Cover #2086/2084
17-5/8”
Wide Body #2005
14-3/8”
Medium Body #2015
9-5/8”
Single Face Body #2025
6-1/4”
Narrow Single Face Body #2021
4-1/2”
Slimline Single Face Body #2020
5-1/4”
Retro Body #2040
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
17
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Configurations with Reveal
Flexible Faces
Tension Frame with Bleed Tension Frame Cover #2085/#2095
17-3/16”
Wide Body #2005
13-15/16”
Medium Body #2015
9-3/8”
Single Face Body #2025
6”
Narrow Single Face Body #2021
4-1/4”
Slimline Single Face Body #2020
5”
Retro Body #2040
Tension Frame with 1-1/2” Tension Frame Cover #2085/#2084
17-5/8”
Wide Body #2005
14-3/8”
Medium Body #2015
9-5/8”
Single Face Body #2025
6-1/4”
Narrow Single Face Body #2021
4-1/2”
Slimline Single Face Body #2020
5-1/4”
Retro Body #2040
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
18
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Configurations with Reveal Vandal Retainers Inner Frame Retainer
with 2Part Outer Frame #2099/#1942
15-3/8”
Wide Body #2005
12-1/8”
Medium Body #2015
8-7/16”
Single Face Body #2025
5-1/16”
Narrow Single Face Body #2021
3-3/8”
Slimline Single Face Body #2020
4-1/8”
Retro Body #2040
Large Inner Frame Retainer with 2Part Large Outer Frame Retainer #2097/#1941
17-13/16”
Wide Body #2005
14-9/16”
Medium Body #2015
9-11/16”
Single Face Body #2025
6-5/16”
Narrow Single Face Body #2021
4-5/8”
Slimline Single Face Body #2020
5-3/8”
Retro Body #2040
19
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Configurations without Reveal
Rigid Plastic Faces Flat 1-1/2” Retainer #2052
20-1/2”
Flat 2 Piece Double Face Body #2009
16-1/2”
Flat 2 Piece Double Face Medium Body #2010
13-1/2”
Flat Double Face Body #2008
8-3/4”
Flat Double Face Medium Body #2007
8-5/16”
Flat Single Face Body #2027
3-1/16”
Flat Wall Mount Retro Body #2042
4-1/16”
Flat Retro Body #2041
Flat 2” Retainer #2047 Flat 2 Piece Double Face Body #2009
20-1/2”
16-1/2”
Flat 2 Piece Double Face Medium Body #2010
13-1/2”
Flat Double Face Body #2008
8-3/4”
Flat Double Face Medium Body #2007
8-5/16”
Flat Single Face Body #2027
3-1/16”
Flat Wall Mount Retro Body #2042
4-1/16”
Flat Retro Body #2041
US Patent Numbers 9,208,701
20
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Configurations without Reveal Bleed Pan Form Faces Flat Bleed Rigid Retainer #2204
21”
Flat 2 Piece Double Face Body #2009
17”
Flat 2 Piece Double Face Medium Body #2010
14”
Flat Double Face Body #2008
9-1/4”
Flat Double Face Medium Body #2007
8-9/16”
Flat Single Face Body #2027
3-5/16”
Flat Wall Mount Retro Body #2042
4-5/16”
Flat Retro Body #2041
Flexible Faces Flat Bleed Retro Frame with Flat Bleed Retro Frame Cover #2104/#2121
24”
Flat 2 Piece Double Face Body #2009
20”
Flat 2 Piece Double Face Medium Body #2010
17”
Flat Double Face Body #2008
12-1/4”
Flat Double Face Medium Body #2007
10-1/16”
Flat Single Face Body #2027
4-13/16”
Flat Wall Mount Retro Body #2042
5-13/16”
Flat Retro Body #2041
US Patent Numbers 9,208,701 / 6,061,941 / 6,637,080
21 CA Patent Numbers 2,245,623 / 2,387,222
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Configurations without Reveal Flexible Faces Flat Bleed Retro Frame II with Flat Bleed Retro Frame Cover #2107/#2121
24-1/2”
Flat 2 Piece Double Face Body #2009
20-1/2”
Flat 2 Piece Double Face Medium Body #2010
17-1/2”
Flat Double Face Body #2008
12-3/4”
Flat Double Face Medium Body #2007
10-5/16”
Flat Single Face Body #2027
5-1/16”
Flat Wall Mount Retro Body #2042
6-1/16”
Flat Retro Body #2041
Commercial Hinge System without Reveal
Commercial Hinge System with Reveal
US Patent Numbers 9,208,701 / 6,061,941 / 6,637,080
CA Patent Numbers 2,245,623 / 2,387,222
22
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Specifications
Note: It is recommended to cut bodies and retainers 1” over nominal T12/T8 lamp length to utilize .040 flat aluminum raceway covers for Part #2005, #2015 and #2025.
Sign Cabinet Bodies with Reveal
3/8” Oversized Hole
1/2”
10-3/4”
Wide Body Part #2005 (Section view through top)
Ballast Bracket Slots
1/4” Joiner Bracket Slot
8-7/16”
Hinge Screw Part #5170
Water Relief Channel
Corner Angle Screw Part #5218
Inner Body Flanges
1/4” Body Corner Angle Part #5312
7-1/2”
Medium Body Part #2015 (Section view through top)
1/4” Joiner Bracket 1/4” Steel Mounting Plate
1/4” Body Corner Angle Slot
5-3/16”
Raceway Cover Tab
Inner Body Flanges
7/16” Mounting Bolt
1/4”
6-3/16”
Single Face Body Part #2025 (Section view through top)
Ballast Bracket Part #5096
Raceway Cover Part #5112
3-15/16”
.177”
Raceway Cover Screw Part #5290
1/2”
Closure Screw Part #5180
2-13/16”
Narrow Single Face Body Part #2021 (Section view through side/bottom)
1/4” Joiner Bracket Slot
1-3/8”
1/4” Body Corner Angle Part #5321
5/8”
1-1/16”
Slimline Single Face Body Part #2020 (Section view through side/bottom)
1/4” Body Corner Angle Part #5320
Back
1-13/16”
Retro Body Part #2040 (Section view through side/bottom)
1-11/16”
1-1/2”
Note: See page 12 for all body components.
Note: Attach the 1/4” steel mounting plate above the inner body flanges to increase structural connection. It is recommended to use safety chains and prop-bars on all hingeable faces.
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
23
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Specifications
Note: It is recommended to cut bodies and retainers 1” over nominal T12/T8 lamp length to utilize .040 flat aluminum raceway covers for Part #2009, #2010, #2008 and #2007. Contact Customer Service for Part #2027.
Sign Cabinet Bodies without Reveal Flat 2 Piece Double Face Body Part #2009
16”
Weldment
1/4” Joiner Bracket Slot
13-13/16”
Corner Angle Screw Part #5218
Flat 2 Piece Double Face Medium Body Part #2010
1/4” Body Corner Angle Part #5909
12”
Weldment
1/4” Joiner Bracket Slot
9-13/16”
Flat Body Hinge/ Closure Screw Part #5178
1/4” Body Corner Angle Part #5910
Flat Double Face Body Part #2008
9”
1/4” Joiner Bracket Slot
6-13/16”
Corner Angle Screw Part #5218
1/4” Body Corner Angle Part #5908
Flat Double Face Medium Body Part #2007
4-1/4”
2-1/4”
1/4” Joiner Bracket
1/4” Body Corner Angle Part #5907
Flat Single Face Body Part #2027
6-1/16”
5”
.064” opening
1/4” Body Corner Angle Part #5327
Flat Single Face Body Corner Angle Screw Part #5199
Back
Flat Retro Body Part #2041
Flat Wall Mount Retro Body Part #2042
13/16”
1-13/16”
1”
2-3/16”
1/4” Corner Angle Part #5305
1/4” Corner Angle Part #5305
Note: See page 12 for all body components.
Note: Attach the 1/4” steel mounting plate above the inner body flanges to increase structural connection. It is recommended to use safety chains and prop-bars on all hingeable faces.
US Patent Numbers 9,208,701 / 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
24
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Specifications
Hingeable Retainers and Covers
1-1/2” Frame Part #2063 1-1/2” Frame Cover Part #2073
For Rigid Plastic Faces
1-1/2” Retainer Part #2055
1-1/2” Retainer II Part #2053
1-1/2”
1-1/2”
1-1/2”
Frame Corner Angle Part #5304
Retainer Screw Part #5195
Frame Corner Angle Part #5304
1”
1-1/8”
1-1/2”
1-1/2”
1-1/2”
Frame Corner Angle Part #5304 Frame Corner Angle Screw Part #5218 Cover Screw Part #5195
Corner Key Part #5210
Corner Key Part #5210
Corner Key Part #5210
Frame Corner Angle Part #5304
.241” Opening
.226” Opening
.226” Opening
Dual Frame Part #2065 2-1/4” Dual Frame Cover Part #2075
2-1/4” Retainer Part #2045
2-1/2”
2-1/2”
Frame Corner Angle Part #5305
Frame Corner Angle Part #5305
1-9/16”
2-1/4”
Cover Screw Part #5195
2-1/4”
Frame Brace Part #5350
Frame Corner Angle Part #5305 Frame Corner Angle Screw Part #5218
Corner Key Part #5210
Corner Key Part #5210
.220” Opening
.250” Opening
Frame Support Tube Part #2175 (Optional)
Frame Corner Angle Part #5305
Note: The Dual Frame with 2-1/4” Dual Frame Cover and the 1-1/2” Frame with 1-1/2” Frame Cover for Rigid Plastic Faces, is engineered to be used on the sides of the cabinet in conjunction with the 2-1/4” Retainer or 1-1/2” Retainer II. This will allow the covers to be removed in order to slide the face in and out.
Flat 1-1/2” Retainer Part #2052 2-1/4”
Flat 2” Retainer Part #2047
2-1/4”
13/16”
1”
1-3/16”
1-1/2” Flat Retainer Corner Brackets Part #5213
2” Flat Retainer Corner Brackets Part #5214
1-1/2”
2”
Corner Bracket Screw Part #5195
Corner Bracket Screw Part #5195
.281” Opening
Bond an optional Aluminum Face to the face of either Flat Retainer
.281” Opening
Note: Parts #2052, #2047 and #2204 are engineered to integrate with the Flat Body System. See page 24
For Bleed Pan Form Faces
Bleed Rigid Retainer Part #2048
Flat Bleed Rigid Retainer Part #2204
1-1/2” 1-3/16”
2-1/2”
1-3/16”
Retainer Screw Part #5195
5/16”
5/16”
Flat Bleed Rigid Retainer Screw Part #5168
Rigid Retainer Hardware Part #5285
Rigid Retainer Hardware Part #5285
1”
1”
Corner Key Part #5210
Corner Key Part #5210
Note: It is recommended to use safety chains and prop-bars on all hingeable faces.
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222 25
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Specifications
Hingeable Retainers For Flexible Faces
Dual Frame Part #2065 2-1/4” Dual Frame Cover Part #2075
2-1/2”
Frame Corner Angle Part #5305
2-1/4”
Cover Screw Part #5195
3”
Frame Brace Part #5350
Corner Key Part #5210
Frame Support Tube Part #2175 (Optional)
Frame Corner Angle Part #5305
Tension Frame II Part #2086 Bleed Tension Frame Cover Part #2095
Attachment Fastener (Not provided)
2-5/8”
Cover Screw Part #5195
1/4”
Corner Key Part #5210
1/8”
Frame Brace Part #5350
Frame Support Tube Part #2175 (Optional)
Frame Corner Angle Part #5305
Attachment Fastener (Not provided)
Tension Frame Part #2085 1-1/2”Tension Frame Cover Part #2084
Bleed Tension Frame Cover Part #2095
2-7/8”
2-5/8”
Cover Screw Part #5195
Cover Screw Part #5195
1/4”
1-1/2”
Corner Key Part #5210
3”
Corner Key Part #5210
Frame Brace Part #5350
Note: Part #2084 works with both Part #2085, Tension Frame and Part #2086, Tension Frame II.
Frame Support Tube Part #2175 (Optional)
Frame Corner Angle Part #5305
Attachment Fastener (Not provided)
1-5/8”
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
UL Recognized Component Systems The Underwriters Laboratory file number is E136850 R
26
Note: It is recommended to use safety chains and prop-bars on all hingeable faces.
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Commercial System Specifications
Dividers For Rigid Plastic Faces
1-1/2” Divider Part #2133 (For use with Part #2053)
2” Divider Part #2138
2-3/4” Divider Part #2128
Divider Corner Angle Part #5300
Divider Corner Angle Part #5301
1-1/2”
2-3/4”
Divider Corner Angle Part #5300
Frame Brace Part #5350 (Optional)
2”
5/8”
7/8”
1-1/4”
.226” Opening
.250” Opening
Frame Support Tube Part #2175 (Optional)
.250” Opening
Attachment Fastener (Not provided)
Flat 2” Divider Part #2130
1-5/8”
Divider Mounting Bracket Part #5302
2”
5/8”
.282” Opening
For Flexible Faces and/or Rigid Plastic Faces
Dual Divider Part #2142 2-1/2” Dual Divider Cover Part #2146
Dual Divider Part #2142 2-1/2” Dual Divider Cover Part #2146
Attachment Fastener (Not provided)
Divider Corner Angle Part #5300
Frame Support Tube Part #2175 (Optional)
Divider Corner Angle Part #5300
5/8”
5/8”
Frame Brace Part #5350
2-1/2”
2-1/2”
Dual Divider Cover Screw Part #5170
Dual Divider Cover Screw Part #5170
13/16”
.220” Opening
Divider Corner Angle Part #5300
Divider Corner Angle Part #5300
US Patent Numbers 6,061,941 / 6,637,080 CA Patent Numbers 2,245,623 / 2,387,222
UL Recognized Component Systems The Underwriters Laboratory file number is E136850 R
27
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101Powered by FlippingBook