Avery Dennison ® MPI2105 Series Long Term Removable StaFlat™ Revision: 13 Dated: 01/19/21
Unsuitable Uses: This Avery Dennison product is not designed or recommended for the following uses. Unsuitable applications or exposure conditions include: ● Paint that is not thoroughly cured or dried ● Low surface energy substrates (i.e. Tedlar ® coatings, rubber, unpainted plastic etc) ● Substrate surfaces that are not clean and smooth (little or no variation in texture) ● Painted substrates with poor paint-to-substrate, or paint-to-paint bond ● Film applied to non-Avery Dennison Films ● Film applied to pre-existing graphics (pre approval required)
● Watercraft below the static water line ● Watercraft which are not edge sealed ● Non-OEM painted vehicles
● Graphic removal from paint with poor adhesion or existing graphics ● Graphics exposed to oil, harsh chemicals, or gasoline vapors or spills ● Graphics where application tape must adhere to liner ● Signcutting of letters and graphics Removability:
The removability listed in the features section “Clean removability” means removable with less than 20% adhesive residue when using appropriate heat and chemical removal methods. See Instructional Bulletin 4.10 for removal instructions. Avery Dennison will reimburse a reasonable portion of extra removal costs, not to exceed the cost of the film used on the application. Avery Dennison does not warrant removability from the following substrates: ● Surfaces with poor paint-to-substrate adhesion ● Wallboard (painted or unpainted) ● Pre existing graphics that must remain intact; damage to existing graphic when film is removed ● Improperly cured paint ● Oxidized or chalked substrates ● Horizontally exposed outdoor applications (as defined in Instructional Bulletin 1.30). ● Stainless Steel Avery Dennison makes no warranty for: ● Paint Staining: Avery Dennison does not warrant vehicle paint staining that may be visible after removing material which has cracked or discolored. To reduce the risk of this problem, always remove the graphic at the first sign of a change in the surface of the material. ● Ease or speed of removal of any graphic ● Removal from automotive paint that is greater than 5 years old. ● Removal from paint that is improperly cured ● Removal from aged paint or metals, surface oxidation or chalking; user must test, approve and accept liability for such applications. ● Removal from horizontally-exposed outdoor applications. Product Data Sheet Page 5 of 6
Powered by FlippingBook