Avery Dennison ® MPI2105 Series Long Term Removable StaFlat™ Revision: 13 Dated: 01/19/21
Related Documents: The following Avery Dennison literature will provide complete information to the user for proper application, storage, and other requirements and is available upon request from your Avery Dennison representative or from the Avery Dennison website ( www.graphics.averydennison.com ).
Document Title
Reference Number
Substrate Cleaning and Preparation
Instructional Bulletin #1.10 Instructional Bulletin #1.20 Instructional Bulletin #1.30 Instructional Bulletin #5.80 Instructional Bulletin #5.50 Instructional Bulletin #4.10 Instructional Bulletin #6.50 Instructional Bulletin #6.30 Instructional Bulletin #6.50
Storage, Maintenance, and Cleaning of PVC Films
Warranty of Avery Dennison Films
Multi Purpose Inkjet OEM Qualification Matrix, Durability Reference, & Troubleshooting Guide
Premask Recommendations
Removal Instructions
Wall Graphics
Application and maintenance of the Avery floor marking System Printing, Processing and Application Instructions for Wall Graphics
Application: Avery Dennison MPI2105 Series is designed for application onto solid surfaces with flat and simple curves such as passenger vehicles, buses, and trains. To ensure color consistency when wrapping a vehicle, ensure the material used is from one production lot # of material. Some slight color shift may occur between rolls or lots, therefore, minimizing the mixing of rolls/lots on a specific vehicle is encouraged. If multiple rolls are needed be sure to use only rolls from the same production lot. MPI2105 Series films can be used for short-term fleet and vehicle applications. Calendered films do exhibit memory for its original shape. Subsequently, when heating and stretching the film shrinkage can be induced. As a calendered film shrinks some tenting and lifting can be expected in areas such as complex, compound and concave curves (i.e. channels). Convex curves (i.e. rivets) should be avoided when using a calendered film. Important Note: Never use a wet application method to apply this film. All vehicle substrates must be cleaned according to Avery Dennison recommended cleaning practices as outlined in IB #1.10 “Substrate Cleaning and Preparation”. NOTE: Signcutting of letters and graphics is not recommended with MPI2105. Cutting for the purposes of preparing sizes or shapes has proven to be feasible. Important Note: Only use Avery Dennison recommended cleaning products and solutions (noted in IB 1.50). Cleaning and maintenance products should conform to the following: ● Free from abrasive components ● Ideally pH balanced, thus not highly acidic or alkaline (pH level between 5 and 9) ● Free from alcohol (non isopropyl), acids, ammonia, chlorine, glycol ethers, harmful detergents, petroleum distillates and phosphates
Product Data Sheet Page 4 of 6
Powered by FlippingBook