Avery Dennison ® MPI2105 Series Long Term Removable StaFlat™ Revision: 13 Dated: 01/19/21
Physical Characteristics:
Property
Measurement
Typical Value
Caliper, face
3.1 mil (80 µm) 1.0mil (25 µm)
Caliper, adhesive Dimensional stability
<0.02” (0.508 mm) Note: Ink loads in excess of 250% may cause increased shrinkage and/or increased initial adhesion of the printed film
Tensile at Yield
9.0 -15.0 lb/in (1.6 - 2.7 kg/cm)
Elongation
100% min.
Gloss
Hunter Gloss @ 60 degrees
85 GU
Adhesion:
15 min 24 hr
1.8 lbs/in (315 N/m) 2.5 lbs/in (438 N/m)
Flammability
FMVSS 302 ASTM E-84
Self Extinguishing Class 1 or A rating
Shelf-Life
2 years from the date of manufacture (when stored at the following temperatures and humidity conditions 68°-77° F (20° - 25° C) and 50±5% R. H.) Unprinted – 6 years Printed – Up to 5 years vertical. See ICS Performance Guarantee for printer specific information
Durability
Vertical Exposure
Min. Application Temperature
50° F (10° C)
Service Temperature
-50° to 176°F (-45° to 80° C) (Reasonable range of temperatures which would be expected under normal environmental conditions).
Chemical resistance
Resistant to most mild acids, alkalis, and salt solutions
Compliance
California Proposition 65
Product Data Sheet Page 2 of 6
Powered by FlippingBook