3M™ Protection Wrap Film Vehicle Installation
FAQ Protection Wrap Film Installation Revision A, April 2024
Do some films appear to change color if applied in different directions? Yes. Certain 3M™ Protection Wrap Film colors, such as textured, metallic, pearl, and color flip films may have a directional characteristic to their appearance. To achieve the best overall appearance, install the film in a consistent orientation for the entire installation. 3M recommends checking the film’s orientation and color prior to installation. Do NOT alternate a film’s orientation from panel to panel. What is the best way to handle and store partial remaining rolls of film? 3M recommends holding the top of the core with one hand and firmly pulling any slack out of the roll. Then tape from the center out to the edges while keeping the roll tight. Additionally, replace the endcaps before placing in a box. What is the warranty on the new 3M™ Protection Wrap Film? 10-year consumer warranty backed by 3M. Ask a 3M authorized installer or see the warranty card for complete details. Installation Overview Where can I get complete installation details? See the 3M™ Protection Wrap Film Installation Guide. Additionally, 3M offers world-class training for professional growth, as well as opportunities to earn an installer endorsement from 3M and be listed on the 3M website. Is film primer required on complex curves? 3M recommends using 3M™ Primer 94 to maximize a film's bond to the substrate in any areas that will be stretched, particularly on the edges of the film. Consult air quality regulations before using 3M™ Primer 94. Can I wet-apply 3M™ Protection Wrap Film? No. 3M does NOT recommend or warrant using a wetting solution on the vehicle surface when applying any film with air release channels. The installer may use a wetting solution on top of the film layer to provide some slip resistance for the squeegee. Health and Safety Tools and Equipment Usage When using any equipment, always follow the manufacturer’s instructions for safe operation. Chemicals When handling any chemical products, read the manufacturers’ container labels and the Safety Data Sheets (SDS) for important health, safety, and environmental information. Follow this link to obtain SDS sheets for 3M products. Follow this link to obtain information about substances of very high concern (SVHC) for EU products.
2
Powered by FlippingBook