HIGH TECK SAFETY DATA SHEETS
HIT_ AFT, HIT_AFC, HIT_AFR, HIT_DAP & HIT_DAG
Material Safety Data Sheet Version 3.2.11 Revision Date 2/18/2023
HIT_AFT/AFC/AFR/DAP/DAG - GREEN ALO ABRASIVE
Inhalation : Inhalation is unlikely under normal conditions. Ingestion : Ingestion is unlikely under normal conditions. If ingested, seek medical attention.
b. Most important symptoms/effects, acute and delayed No information available. c.Immediate medical attention and special treatment No information available.
5.FIRE FIGHTING MEASURES a.Extinguishing media
Suitable extinguishing media: Water, dry chemical, chemical foam, or alcohol-resistant foam.
Unsuitable extinguishing media: No information available.
b.Special hazards arising from the chemical
During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
c.Special protective equipment and precautions for fire-fighters
Fire-fighters should wear appropriate breathing apparatus and protective equipment. Fire- fighting in the wind. Prevent fire extinguishing water from contaminating surface water or the ground water system.
6.ACCIDENTAL RELEASE MEASURES a.Personal precautions, protective equipment and emergency procedures
Not required.
b.Methods and materials for containment and cleaning up
Pick up mechanically.
7.HANDLING AND STORAGE
a. Keep temperature at 0℃ - 40℃
b. Keep humidity at 30-60%
c. In use, do not smoke or eat
d. Avoid rough handling or dropping
e. Protect against physical damage
8.EXPOSURE CONTROLS AND PERSONAL PROTECTION a. Control parameters : Not established
b. As needed, approved dust respirator.
2/5
Powered by FlippingBook