HIGH TECK SAFETY DATA SHEETS
HIT_ AFT, HIT_AFC, HIT_AFR, HIT_DAP & HIT_DAG
Material Safety Data Sheet Version 3.2.11 Revision Date 2/18/2023
HIT_ AFT / AFC / AFR / DAP / DAG - G REEN ALO A BRASIVE
Manufacturer/Importer/Supplier/Distributor information Company name Address
HIGH TECK PRODUCTS PO BOX 24631 WEST PALM BEACH, FLORIDA 33416 - USA T 877-900-8325 info@highteckproducts.com
Telephone
Email address:
Emergency telephone number: Transport North America: CHEMTREC 800.424.9300
800-424-9300 ChemTrec
EMERGENCY 24 Hrs.
Emergency phone number
2.HAZARDS IDENTIFICATION
Not applicable.
3.COMPOSITION/INFORMATION ON INGREDIENTS
GRIT: P40-P800
Exposure Limits
Approximate Concentraction （ ±5% ）
C.A.S.N.A or U.N.Numbers
LD50/LC50 Specify Species & Route
Hazardous Ingredients
ACGIH TLV OSHA PEL
Aluminum Oxide
25-30
1344-28-1
N/A
N/A
Epoxy Resin
5-10
38891-59-7
N/A
N/A
Phenol Resin
15-30
9003-35-4
N/A
N/A
Paper
20-25
Mixture
N/A
N/A
Calcium Stearate
3-5
1592-23-0
N/A
N/A
100-21-0 107-21-1
Others
2
N/A
N/A
4.FIRST AID MEASURES a. Description of first aid measures
Eye Contact : No irritating effect to eyes known. If unexpected contact, may cause slightly physical or mechanical damage. Get medical attention if symptoms persist. Skin Contact : No irritating effects to skin, no special measures requirements.
1/5
HIGH TECK SAFETY DATA SHEETS
HIT_ AFT, HIT_AFC, HIT_AFR, HIT_DAP & HIT_DAG
Material Safety Data Sheet Version 3.2.11 Revision Date 2/18/2023
HIT_AFT/AFC/AFR/DAP/DAG - GREEN ALO ABRASIVE
Inhalation : Inhalation is unlikely under normal conditions. Ingestion : Ingestion is unlikely under normal conditions. If ingested, seek medical attention.
b. Most important symptoms/effects, acute and delayed No information available. c.Immediate medical attention and special treatment No information available.
5.FIRE FIGHTING MEASURES a.Extinguishing media
Suitable extinguishing media: Water, dry chemical, chemical foam, or alcohol-resistant foam.
Unsuitable extinguishing media: No information available.
b.Special hazards arising from the chemical
During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
c.Special protective equipment and precautions for fire-fighters
Fire-fighters should wear appropriate breathing apparatus and protective equipment. Fire- fighting in the wind. Prevent fire extinguishing water from contaminating surface water or the ground water system.
6.ACCIDENTAL RELEASE MEASURES a.Personal precautions, protective equipment and emergency procedures
Not required.
b.Methods and materials for containment and cleaning up
Pick up mechanically.
7.HANDLING AND STORAGE
a. Keep temperature at 0℃ - 40℃
b. Keep humidity at 30-60%
c. In use, do not smoke or eat
d. Avoid rough handling or dropping
e. Protect against physical damage
8.EXPOSURE CONTROLS AND PERSONAL PROTECTION a. Control parameters : Not established
b. As needed, approved dust respirator.
2/5
HIGH TECK SAFETY DATA SHEETS
HIT_ AFT, HIT_AFC, HIT_AFR, HIT_DAP & HIT_DAG
Material Safety Data Sheet Version 3.2.11 Revision Date 2/18/2023
HIT_AFT/AFC/AFR/DAP/DAG - GREEN ALO ABRASIVE
c. Wear protective eye glasses or chemical safety goggles.
d. No precautions other than clean body covering clothing should be needed.
e. As needed, hearing protection.
9.PHYSICAL AND CHEMICAL PROPERTIES Appearance : Solid
Odor : Odourless
Odor threshold : Not available.
pH : Not applicable.
Melting point/freezing point : Not available.
Initial boiling point and boiling range :
Not available.
Flash point : Not applicable.
Evaporation rate : Not applicable.
Flammability : Not available.
Upper/lower flammability or explosive limits :
Not available.
Vapor pressure : Not applicable.
Vapor density : Not applicable.
Density : Not available.
Solubility(ies) : Insoluble in water.
Partition coefficient: n-octanol/water :
Not available.
Auto-ignition temperature : Not available.
Decomposition temperature : Not available.
Viscosity : Not applicable.
10.STABILITY AND REACTIVITY
Reactivity : Stable under recommended storage and handling conditions.
Chemical stability : Stable under normal conditions.
Possibility of hazardous reactions : None hazardous reactions known.
Conditions to avoid : Flame, open fire, source of ignition.
Incompatible materials : No information available.
Hazardous decomposition products : Irritating and highly toxic gases may be generated: Carbon monoxide, carbon dioxide.
3/5
HIGH TECK SAFETY DATA SHEETS
HIT_ AFT, HIT_AFC, HIT_AFR, HIT_DAP & HIT_DAG
Material Safety Data Sheet Version 3.2.11 Revision Date 2/18/2023
HIT_AFT/AFC/AFR/DAP/DAG - GREEN ALO ABRASIVE
11.TOXICOLOGICAL INFORMATION a.Information on the likely routes of exposure
Inhalation : Not the likely route of exposure.
Ingestion : Not the likely route of exposure.
Skin contact : Not the likely route of exposure.
Eye contact : Not the likely route of exposure.
b.Information on toxicological characteristics
Acute toxicity : No information available.
Skin corrosion/irritation : No irritating effect.
Serious eye damage/irritation : No irritating effect.
Respiratory sensitization : No sensitizing effects known.
Skin sensitization : No sensitizing effects known.
Carcinogenicity : No information available.
Germ Cell Mutagenicity : No information available.
Reproductive Toxicity : No information available.
STOT-Single Exposure : No information available.
STOT-Repeated Exposure : No information available.
Aspiration Hazard : No information available.
12.ECOLOGICAL EFFECTS
Ecotoxicity : No information available. Persistence and Degradability : No information available. Bioaccumulative potential : No information available. Mobility in soil : No information available. Other adverse effects : No information available.
13.DISPOSAL CONSIDERATION a.Safe handling and methods of disposal
Disposal should be in accordance with applicable regional, national and local laws and regulations.
14.TRANSPORT INFORMATION
UN number : Not regulated.
UN Proper shipping name : Not regulated.
4/5
HIGH TECK SAFETY DATA SHEETS
HIT_ AFT, HIT_AFC, HIT_AFR, HIT_DAP & HIT_DAG
Material Safety Data Sheet Version 3.2.11 Revision Date 2/18/2023
HIT_AFT/AFC/AFR/DAP/DAG - GREEN ALO ABRASIVE
Transport hazard class(es) : Not regulated.
Packing group (if applicable) : Not regulated.
Marine pollutant (Yes/No) : No.
Transport in bulk (according to Annex II of MARPOL 73/78 and the IBC Code) :
Not regulated.
Special precautions : No information available.
15.REGULATORY INFORMATION
The company is not able to check up the regulatory information in regard to be substances in your country or region, therefore, we request this matter would be filled by your responsibility.
16.OTHER INFORMATION
a.References : Chemical substances of unknown or variable composition complex reaction products andbiological material.Coated abrasives modern tool of industry. b.Other : The information and recommendations set forth herein are taken from sources believed
to be accurate as of the date hereof ; however, High Teck Products makes no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assumes no liability to any user thereof.
5/5
Page 1 Page 2 Page 3 Page 4 Page 5Powered by FlippingBook