3M™ Abrasive Products, 316U Red Abrasive Stikit™, Hookit™ Discs, Sheets, Rolls
11/17/23
Article Information Sheet Copyright,2023, 3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. This Article Information Sheet is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has not been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health Administration’s Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: “Article” means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees. Document Group: 19-0346-7 Version Number: 1.01 Issue Date: 11/17/23 Supercedes Date: 11/23/22 SECTION 1: Identification 1.1. Product identifier 3M™ Abrasive Products, 316U Red Abrasive Stikit™, Hookit™ Discs, Sheets, Rolls 1.2. Recommended use and restrictions on use Recommended use Abrasive Product 1.3. Supplier’s details MANUFACTURER: 3M DIVISION: Automotive Aftermarket ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification This product is exempt from hazard classification according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 3: Composition/information on ingredients Ingredient C.A.S. No.
% by Wt
Paper Backing Aluminum Oxide
None
15 - 55 Trade Secret * 10 - 50 Trade Secret *
1344-28-1
__________________________________________________________________________________________ Page 1 of 4 10 - 30 Trade Secret * *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade Cured Resin Trade Secret*
3M™ Abrasive Products, 316U Red Abrasive Stikit™, Hookit™ Discs, Sheets, Rolls
11/17/23
secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you are concerned, get medical advice. Skin Contact: No need for first aid is anticipated. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If Swallowed: No need for first aid is anticipated. SECTION 5: Fire-fighting measures In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Not applicable. 6.2. Environmental precautions Not applicable. 6.3. Methods and material for containment and cleaning up Not applicable. SECTION 7: Handling and storage 7.1. Precautions for safe handling Avoid breathing of dust created by sanding, grinding or machining. Always wear eye protection when working at sanding or grinding operations or when near such operations. Combustible dust may form by action of this product on another material (substrate). 7.2. Conditions for safe storage including any incompatibilities No special storage requirements. SECTION 8: Exposure controls/personal protection Consider the material being abraded when determining the appropriate respiratory protection.
SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties
__________________________________________________________________________________________ Page 2 of 4
3M™ Abrasive Products, 316U Red Abrasive Stikit™, Hookit™ Discs, Sheets, Rolls
11/17/23
Appearance
Physical state Color
Solid Red
Odor
Odorless
Odor threshold
Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Classified Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable
pH
Melting point Boiling Point Flash Point
Flammability (solid, gas) Flammable Limits(LEL) Flammable Limits(UEL) Vapor Pressure Vapor Density Specific Gravity Solubility In Water Solubility- non-water Autoignition temperature Decomposition temperature
Partition coefficient: n-octanol/ water
Viscosity
SECTION 10: Stability and reactivity This material is considered to be non reactive under normal use conditions. SECTION 11: Toxicological information
Inhalation: Dust from grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Skin Contact: No health effects are expected Eye Contact: Dust created by grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Ingestion: No health effects are expected SECTION 12: Ecological information This article is expected to present a low environmental risk either because use and disposal are unlikely to result in a significant release of components to the environment or because those components that may be released are expected to have insignificant environmental impact. SECTION 13: Disposal considerations Dispose of contents/container in accordance with the local/regional/national/international regulations.
__________________________________________________________________________________________ Page 3 of 4
3M™ Abrasive Products, 316U Red Abrasive Stikit™, Hookit™ Discs, Sheets, Rolls
11/17/23
SECTION 14: Transport Information Not regulated per U.S. DOT, IATA or IMO.
These transportation classifications are provided as a customer service. As the shipper YOU remain responsible for complying with all applicable laws and regulations, including proper transportation classification and packaging. 3M transportation classifications are based on product formulation, packaging, 3M policies and 3M understanding of applicable current regulations. 3M does not guarantee the accuracy of this classification information. This information applies only to transportation classification and not the packaging, labeling, or marking requirements. The original 3M package is certified for U.S. ground shipment only. If you are shipping by air or ocean, the package may not meet applicable regulatory requirements. SECTION 15: Regulatory information Chemical Inventories This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory requirements. SECTION 16: Other information NFPA Hazard Classification Health: 0 Flammability: 1 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 19-0346-7 Version Number: 1.01 Issue Date: 11/17/23 Supercedes Date: 11/23/22 DISCLAIMER: The information in this Article Information Sheet (AIS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the AIS available directly from 3M 3M USA AISs are available at www.3M.com
__________________________________________________________________________________________ Page 4 of 4
Page 1 Page 2 Page 3 Page 4Powered by FlippingBook