Glantz acrylic is a cell cast acrylic and has a higher surface hardness. It is resilient, easy to handle and fabricate.
ORAJET ® 3551 HIGH PERFORMANCE CALENDERED PVC DIGITAL MEDIA WITH COMMANDFORM ® TECHNOLOGY
Technical Datasheet 10/19 Page 1 of 1
Description 2.75-mil, high performance calendered PVC film in arctic white or transparent with a gloss surface Release Liner 88# PE-coated silicone paper Adhesive Grey, solvent-based repositionable, permanent adhesive (transparent gloss offers a clear adhesive) Area of Use For general signage, vehicle graphics requiring limited conformability and other medium- to long-term outdoor applications Technical Data
Thickness (without liner and adhesive)
2.75-mil
Adhered to steel, no shrinkage in cross direction; In length, <.008” Adhered to aluminum, -58°F to +194°F, no variation
Dimensional Stability (FINAT TM-14)
Temperature Resistance Fire Behavior (DIN 75200) Fire Rating
Adhered to steel, self-extinguishing ASTM E 84-07 Class “A” Adhered to stainless steel: 4.1 lb/in
Adhesive Power (FINAT TM-1, after 24 h, average)
Along: Min. 19 MPa Across: Min. 19 MPa Along: Min. 130% Across: Min. 150%
Tensile Strength (DIN EN ISO 527)
Elongation at Break (DIN EN ISO 527)
Seawaterability (DIN 50 021)
Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity)
2 years
Minimum Life Expectancy (based on accepted application procedures on vertical surfaces)
7 years (unprinted)
Minimum Application Temperature
46°F
Available Lengths Available Widths
150’ (50-yard) 30”, 36” (white only), 54”, 60”
Recommended Laminates
ORAGUARD ® Series 215, 290, 290GF, 293, 297GF
Note Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number. IMPORTANT NOTICE All ORAJET ® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORAJET ® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORAJET ® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Latex, Solvent, Eco-Solvent, UV Curable For best results, utilize ORAFOL ICC profiles available at www.orafolamericas.com and allow solvent-based inks to dry for at least 24 hours (48-72 hours preferred) at 70°F before cutting the graphic to the ink or applying a laminate. Print Compatibility
www.nglantz.com | 1.866.645.2689
Page 1Powered by FlippingBook