Change-Over Before changing over to Ultra Jet DLE-JX it is generally recommended to completely drain the ink system before rinsing all ink-carrying components with cleaner DI-UR.
Colour Range Basic Shades • 428 Yellow • 434 Light Magenta
• 438 Magenta • 455 Light Cyan
• 459 Cyan • 489 Black • 170 White
Auxiliaries DI-UR Cleaner DI-UR 3 Cleaner P 2 Primer
Depending on the current ink type and your colour match requirements there are three different options for a changeover: • Switch & Print = full chemical and colour compatibility • Switch & Swap = Flushing is required • Switch & Match = Colour profiling is required for the best colour match
For the ink changeover, it is recommended to use DI-UR for all ink-carrying components of the ink system. This cleaner has been chemically adjusted to the ink. DI-UR 3 can be used for cleaning print heads and other ink-carrying components and should be used if any parts need to be soaked for a while. This cleaner has been chemically adjusted to the ink. Thanks to its higher viscosity, it is especially developed for printers with automatic cleaning units. Special Primer P 2 is used for manual precleaning and pretreatment of PP substrates and metals. In addition, improved adhesion properties can be obtained on powder coatings. Shelf Life The shelf life for an unopened ink container if stored in a dark room at a temperature of 15 - 25°C is:
Please contact Marabu to confirm the necessary process for your printer.
• 1 year for all shades
The ambient temperature may fall below this value only once for max. 2-3 days. Under different conditions, particularly other storage temperatures, the shelf life will be reduced. In such cases, the warranty given by Marabu expires.
Page 2 of 3
Powered by FlippingBook