Change-Over Before changing over to Ultra Jet DLE-JF it is generally recommended to completely drain the ink system before rinsing all ink-carrying components with cleaner DI-UR.
Colour Range Basic Shades • 428 Yellow • 434 Light Magenta
• 438 Magenta • 455 Light Cyan • 459 Cyan • 489 Black Hilfsmittel DI-UR Reiniger DI-UR 3 Reiniger P 2 Primer
Depending on the current ink type and your colour match requirements there are three different options for a changeover: • Switch & Print = full chemical and colour compatibility • Switch & Swap = Flushing is required • Switch & Match = Colour profiling is required for the best colour match Please contact Marabu to confirm the necessary process for your printer Note Our technical advice whether spoken, written, or through test trials corresponds to our current knowledge to inform about our products and their purpose. This is not meant as an assurance for certain properties of the products nor their suitability for each application. Therefore, you are obliged to conduct your own tests with our supplied products to confirm their suitability for the desired process or purpose. The foregoing information is based on our experience and should not be used for specification purposes. All characteristics described in this Technical Data Sheet refer exclusively to the standard products listed under "Range", provided that they are processed in accordance with their intended use and only when used with the recommended auxiliaries. The selection and testing of the ink for specific applications is exclusively your responsibility. Should, however, any liability claims arise, they shall be limited to the value of the goods delivered by us and utilised by you with respect to any and all damages not caused intentionally or by gross negligence.
For the ink changeover, it is recommended to use DI-UR for all ink-carrying components of the ink system. This cleaner has been chemically adjusted to the ink. DI-UR 3 can be used for cleaning print heads and other ink-carrying components, and should be used if any parts need to be soaked for awhile. This cleaner has been chemically adjusted to the ink. Thanks to its higher viscosity, it is especially developed for printers with automatic cleaning units. Special Primer P 2 is used for manual precleaning and pretreatment of PP substrates and metals. In addition, improved adhesion properties can be obtained on powder coatings. Shelf Life The shelf life for an unopened ink container if stored in a dark room at a temperature of 15 - 25°C is: • 9 months for 170 & 910 The ambient temperature may fall below this value only once for max. 2-3 days. Under different conditions, particularly other storage temperatures, the shelf life will be reduced. In such cases, the warranty given by Marabu expires.
Page 2 of 3
Powered by FlippingBook