Technical Data Sheet Effective: 12/06/2020 Supersedes: 02/03/2020
3)
Physical Properties
Element
Material of construction
Liner
LDPE (Low density polyethylene)
Lid
PP (polypropylene)
Filter
Nylon 6
4)
Directions for Use
Insert a disposable liner in the cup Mix paint right inside the 3M™ PPS™ Series 2.0 Cup and Liner Place lid on top of cup, align black portion of quarter-turn lid locking system with cup access window and push down - twist to lock Choose the right adapter for your spray gun - push down and twist until adapter locks into lid When finished spraying, disconnect air line, invert gun and pull trigger to return excess paint to cup Gently tap 3M™ PPS™ Series 2.0 Lid and Liner on a surface to help break surface tension of liquid and allow it to flow back into liner Removing the lid and liner from the hard cup, twist lid to unlock, place fingers through hole in bottom of cup and push liner upwards, releasing lid and liner together Use the 3M™ PPS™ Series 2.0 Cup Sealing - plug to seal and protect coatings not in use, in accordance with local regulations or authorities Removal from hard cup
Consult paint or solvent Safety Data Sheets (SDS) in addition to local regulations or authorities for safe use and proper disposal.
Page 2 of 4
Powered by FlippingBook