3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
Safety Data Sheet
Copyright,2023, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 18-8534-2 Version Number: 7.00 Issue Date: 06/09/23 Supercedes Date: 02/24/14 SECTION 1: Identification 1.1. Product identifier 3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads 1.2. Recommended use and restrictions on use Recommended use Abrasive Product, For industrial/occupational use only. Not for consumer sale or use. 1.3. Supplier’s details MANUFACTURER: 3M DIVISION: Abrasive Systems Division ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification 2.1. Hazard classification Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200. 2.2. Label elements Signal word Not applicable. Symbols Not applicable. Pictograms Not applicable.
26% of the mixture consists of ingredients of unknown acute oral toxicity. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No.
% by Wt
Aluminum Oxide Mineral
1344-28-1
30 - 50 Trade Secret *
__________________________________________________________________________________________ Page 1 of 10
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
Nylon Fiber Cured Resin
Mixture Mixture
25 - 35 Trade Secret * 15 - 30 Trade Secret * 5 - 10 Trade Secret *
Filler
1317-65-3 13463-67-7 14808-60-7
Titanium Dioxide
< 1.5 Trade Secret *
__________________________________________________________________________________________ Page 2 of 10 Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures No critical symptoms or effects. See Section 11.1, information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Amine Compounds During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Hydrogen Cyanide During Combustion Ammonia During Combustion Oxides of Nitrogen During Combustion 5.3. Special protective actions for fire-fighters Quartz Silica < 0.2 Trade Secret * *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Wash with soap and water. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If Swallowed: Do not induce vomiting. Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
Observe precautions from other sections. 6.2. Environmental precautions Not applicable. 6.3. Methods and material for containment and cleaning up Not applicable. SECTION 7: Handling and storage 7.1. Precautions for safe handling
For industrial/occupational use only. Not for consumer sale or use. Avoid breathing of dust created by sanding, grinding or machining. Combustible dust may form by action of this product on another material (substrate). Dust generated from the substrate during use of this product may be explosive if in sufficient concentration with an ignition source. Dust deposits should not be allowed to accumulate on surfaces because of the potential for secondary explosions. 7.2. Conditions for safe storage including any incompatibilities No special storage requirements. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments Filler 1317-65-3 OSHA
TWA(as total dust):15 mg/m3;TWA(respirable fraction):5 mg/m3 TWA(inhalable particulates):10 mg/m3 TWA(respirable particles):3 mg/m3 TWA(as total dust):15 mg/m3;TWA(respirable fraction):5 mg/m3 TWA(respirable fraction):1 mg/m3 TWA(inhalable particulates):10 mg/m3 TWA(respirable particles):3 mg/m3 TWA(Respirable nanoscale particles):0.2 mg/m3;TWA(Respirable finescale particles):2.5 mg/m3 TWA(as total dust):15 mg/m3
Particles (insoluble or poorly soluble) not otherwise specified, inhalable particles Particles (insoluble or poorly soluble) not otherwise specified, respirable particles Aluminum Oxide Mineral
1317-65-3 ACGIH
1317-65-3 ACGIH
1344-28-1 OSHA
Aluminum, insoluble compounds 1344-28-1 ACGIH
A4: Not class. as human carcin
Particles (insoluble or poorly soluble) not otherwise specified, inhalable particles Particles (insoluble or poorly soluble) not otherwise specified, respirable particles
1344-28-1 ACGIH
1344-28-1 ACGIH
Titanium Dioxide
13463-67-7 ACGIH
A3: Confirmed animal carcin.
Titanium Dioxide
13463-67-7 OSHA 14808-60-7 ACGIH
Quartz Silica
TWA(respirable fraction):0.025 mg/m3
A2: Suspected human carcin.
__________________________________________________________________________________________ Page 3 of 10
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
Quartz Silica
14808-60-7 OSHA
TWA Table Z- 1(respirable):0.05 mg/m3;TWA Table Z-
3(respirable):0.1 mg/m3;TWA concentration(respirable):0.1 mg/m3(2.4 millions of particles/cu. ft.)
ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration
__________________________________________________________________________________________ Page 4 of 10 An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance Physical state Color Solid Red TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls Provide appropriate local exhaust ventilation for sanding, grinding or machining. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Provide local exhaust at process emission sources to control exposure near the source and to prevent the escape of dust into the work area. Ensure that dust-handling systems (such as exhaust ducts, dust collectors, vessels, and processing equipment) are designed in a manner to prevent the escape of dust into the work area (i.e., there is no leakage from the equipment). 8.2.2. Personal protective equipment (PPE) Eye/face protection To minimize the risk of injury to face and eyes, always wear eye and face protection when working at sanding or grinding operations or when near such operations. Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended: Safety Glasses with side shields Skin/hand protection Wear appropriate gloves to minimize risk of injury to skin from contact with dust or physical abrasion from grinding or sanding. Respiratory protection Assess exposure concentrations of all materials involved in the work process. Consider material being abraded when determining the appropriate respiratory protection. Select and use appropriate respirators to prevent inhalation overexposure.
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
Odor
Slight Polymeric Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Classified Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable
Odor threshold
pH
Melting point Boiling Point Flash Point Evaporation rate
Flammability (solid, gas) Flammable Limits(LEL) Flammable Limits(UEL) Vapor Pressure Vapor Density Specific Gravity Solubility in Water Solubility- non-water Autoignition temperature Decomposition temperature
Partition coefficient: n-octanol/ water
Viscosity
SECTION 10: Stability and reactivity 10.1. Reactivity This material is considered to be non reactive under normal use conditions. 10.2. Chemical stability Stable.
10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid None known. 10.5. Incompatible materials None known. 10.6. Hazardous decomposition products Substance
Condition
None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information
__________________________________________________________________________________________ Page 5 of 10 The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: Dust from grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Skin Contact: Mechanical Skin irritation: Signs/symptoms may include abrasion, redness, pain, and itching. Eye Contact: Mechanical eye irritation: Signs/symptoms may include pain, redness, tearing and corneal abrasion. Dust created by grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Ingestion: No health effects are expected. Carcinogenicity:
Ingredient
CAS No. 14808-60-7 14808-60-7
Class Description
Regulation
Silica, Crystalline (Respirable Size)
Known To Be Human Carcinogen. Grp. 1: Carcinogenic to humans
National Toxicology Program Carcinogens International Agency for Research on Cancer
Silica dust, crystalline, in the form of quartz or cristobalite
Titanium dioxide
13463-67-7
Grp. 2B: Possible human carc.
International Agency for Research on Cancer
Additional Information: This document covers only the 3M product. For complete assessment, when determining the degree of hazard, the material being abraded must also be considered. This product contains titanium dioxide and quartz (crystalline) silica. Cancer of the lungs has been associated with inhalation of high levels of titanium dioxide in animal studies, and occupational exposure to inhaled quartz silica has been associated with silicosis and lung cancer. No exposure to titanium dioxide or quartz silica is expected during the normal handling and use of this product. Titanium dioxide and quartz silica were not detected when air sampling was conducted during simulated use of similar products containing these substances. Therefore, the health effects associated with titanium dioxide and quartz (crystalline) silica are not expected during the normal use of this product. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Route Species Value Overall product Ingestion No data available; calculated ATE >5,000 mg/kg Aluminum Oxide Mineral Dermal LD50 estimated to be > 5,000 mg/kg Aluminum Oxide Mineral Rat LC50 > 2.3 mg/l
Inhalation- Dust/Mist (4 hours) Ingestion Inhalation- Dust/Mist (4 hours) Dermal Ingestion Dermal Inhalation- Dust/Mist (4 hours)
Aluminum Oxide Mineral
Rat Rat Rat
LD50 > 5,000 mg/kg LD50 > 2,000 mg/kg
Filler Filler
LC50 3 mg/l
Filler
Rat
LD50 6,450 mg/kg LD50 > 10,000 mg/kg LC50 > 6.82 mg/l
Titanium Dioxide Titanium Dioxide
Rabbit
Rat
__________________________________________________________________________________________ Page 6 of 10
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
Titanium Dioxide
Ingestion Dermal Ingestion
Rat
LD50 > 10,000 mg/kg
Quartz Silica Quartz Silica
LD50 estimated to be > 5,000 mg/kg LD50 estimated to be > 5,000 mg/kg
ATE = acute toxicity estimate Skin Corrosion/Irritation Name
Species
Value
Aluminum Oxide Mineral
Rabbit Rabbit Rabbit
No significant irritation No significant irritation No significant irritation No significant irritation
Filler
Titanium Dioxide
Quartz Silica
Professio nal judgeme nt
Serious Eye Damage/Irritation Name
Species
Value
Aluminum Oxide Mineral
Rabbit Rabbit Rabbit
No significant irritation No significant irritation No significant irritation
Filler
Titanium Dioxide
Skin Sensitization Name
Species Human and animal
Value
Titanium Dioxide
Not classified
Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Germ Cell Mutagenicity Name Route Value
Aluminum Oxide Mineral
In Vitro In Vitro In vivo In Vitro
Not mutagenic Not mutagenic Not mutagenic
Titanium Dioxide Titanium Dioxide
Quartz Silica
Some positive data exist, but the data are not sufficient for classification Some positive data exist, but the data are not sufficient for classification
Quartz Silica
In vivo
Carcinogenicity Name
Route
Species
Value
Aluminum Oxide Mineral
Inhalation Rat
Not carcinogenic Not carcinogenic
Titanium Dioxide
Ingestion Multiple animal species Inhalation Rat Inhalation Human and animal
Titanium Dioxide
Carcinogenic Carcinogenic
Quartz Silica
Reproductive Toxicity Reproductive and/or Developmental Effects Name Route
Value
Species
Test Result
Exposure Duration
Filler
Ingestion Not classified for development
Rat
NOAEL 625 mg/kg/day
premating & during
__________________________________________________________________________________________ Page 7 of 10
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
gestation
Target Organ(s) Specific Target Organ Toxicity - single exposure Name Route Target Organ(s)
Value
Species
Test Result
Exposure Duration 90 minutes
Filler
Inhalation respiratory system Not classified
Rat
NOAEL 0.812 mg/l
Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s)
Value
Species
Test Result
Exposure Duration occupational exposure occupational exposure occupational exposure
Aluminum Oxide Mineral
Inhalation pneumoconiosis
Some positive data exist, but the data are not sufficient for classification
Human NOAEL Not available Human NOAEL Not available Human NOAEL Not available
Aluminum Oxide Mineral
Inhalation pulmonary fibrosis
Not classified
Filler
Inhalation respiratory system Not classified
Titanium Dioxide
Inhalation respiratory system Some positive data exist, but the data are not sufficient for classification
Rat
LOAEL 0.01 mg/l
2 years
Titanium Dioxide
Inhalation pulmonary fibrosis
Not classified
Human NOAEL Not available Human NOAEL Not available
occupational exposure occupational exposure
Quartz Silica
Inhalation silicosis
Causes damage to organs through prolonged or repeated exposure
Aspiration Hazard For the component/components, either no data are currently available or the data are not sufficient for classification. Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Prior to disposal, consult all applicable authorities and regulations to insure proper classification. The substrate that was abraded must be considered as a factor in the disposal method for this product. Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. If no other disposal options are available, waste product may
be placed in a landfill properly designed for industrial waste. SECTION 14: Transport Information
__________________________________________________________________________________________ Page 8 of 10
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
Not regulated per U.S. DOT, IATA or IMO. These transportation classifications are provided as a customer service. As the shipper YOU remain responsible for complying with all applicable laws and regulations, including proper transportation classification and packaging. 3M transportation classifications are based on product formulation, packaging, 3M policies and 3M understanding of applicable current regulations. 3M does not guarantee the accuracy of this classification information. This information applies only to transportation classification and not the packaging, labeling, or marking requirements. The original 3M package is certified for U.S. ground shipment only. If you are shipping by air or ocean, the package may not meet applicable regulatory requirements. SECTION 15: Regulatory information 15.1. US Federal Regulations Contact 3M for more information. EPCRA 311/312 Hazard Classifications: Physical Hazards Not applicable Health Hazards Not applicable Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):
Ingredient
C.A.S. No 1344-28-1 1344-28-1
% by Wt
Aluminum Oxide Mineral
Trade Secret 30 - 50 Trade Secret 30 - 50
Aluminum Oxide Mineral (ALUMINUM OXIDE (FIBROUS FORMS ONLY))
__________________________________________________________________________________________ Page 9 of 10 emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. 15.2. State Regulations Contact 3M for more information. 15.3. Chemical Inventories This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 0 Flammability: 1 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads
06/09/23
Document Group:
Version Number: Supercedes Date:
18-8534-2 06/09/23
7.00
Issue Date: 02/24/14 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M. 3M USA SDSs are available at www.3M.com
__________________________________________________________________________________________ Page 10 of 10
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10Powered by FlippingBook