ARTICLE INFORMATION SHEET
The product listed below is an “article,” and therefore is not subject to the Occupational Safety and Health Administration’s ( OSHA) Hazard Communication Standard, 29 CFR 1910.1200(b)(6)(v), and 1910.1200(c) which defines an “Article,” as a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which under normal conditions of use does not release more than very small quantities, e.g. , minute or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees. For this product, an article, a Safety Data Sheet (SDS) has not been prepared, as none is required under OSHA. However, this Article Information Sheet document was prepared as a courtesy for our customers.
1.
PRODUCT AND COMPANY IDENTIFICATION
Product Name:
Masking Tapes: 506, 509, 513, 514, 515, 518, 519, 543, AM (Aqua Mask), BD23, BD24, Fineline, LA26, MSK9, MSK14, MP, OM (Orange Mask), PB1, PF3, PG, PG5, PG8, PG14, PG16, PG20, PG21, PG21A, PG24, PG27, PG28A, PG29, PG48, PG49, PG56, PG57R, PG495, PG500, PG505, PG777, PT7, PT8, PT14, TM27, UG
Company:
Intertape Polymer Group 100 Paramount Drive, Suite 300 Sarasota, Florida 34232
Product Use:
Paint masking and other applications
Issue Date:
July 25, 2018 (877) 447-4832
Emergency phone number:
2.
HAZARD IDENTIFICATION
This product is exempt from OSHA’s Hazard Communication Standard (29 CFR 1910.1200). However, this product should not present a health or safety hazard under recommended or normal use of the product.
page 1 of 5
3.
COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient
C.A.S. Number
Weight (%) Percentage
Pressure Sensitive Tape 100 *chemical identities and percentage formulations are withheld as IPG proprietary information IPG Trade Secret*
4.
FIRST AID MEASURES
Eye contact:
No need for first aid measures is anticipated under recommended/normal use conditions No need for first aid measures is anticipated under recommended/normal use conditions No need for first aid measures is anticipated under recommended/normal use conditions No need for first aid measures is anticipated under recommended/normal use conditions
Skin contact:
Inhalation:
Ingestion:
5.
FIRE FIGHTING MEASURES
Flash point:
Not applicable Not applicable Not applicable Not applicable
Flammable limits – LEL: Flammable limits – UEL: Auto ignition temperature:
Extinguishing media:
Water Spray, Dry Chemical, Foam
Special firefighting procedures:
Wear full protective equipment and a self-contained breathing apparatus
Unusual fire and explosion hazards:
Not applicable
6.
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment, and emergency Procedures: Environmental precautions: Cleanup methods and materials:
Not applicable Not applicable Not applicable
Page 2 of 5
7.
HANDLING AND STORAGE
Precautions for safe handling:
This product, an article, does not release or otherwise result in any hazardous chemical exposure under recommended/normal use conditions. No special storage requirements are necessary for this product.
Conditions for safe storage: (including any incompatibilities)
8.
EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure limits:
This product is exempt from OSHA’s Hazard Communication Standard (29 CFR 1910.1200). However, this product should not present a health or safety hazard under recommended or normal use of the product.
Engineering controls:
(see above) (see above)
Eye protection: Skin protection:
(see above) However, frequent skin contact should be avoided and gloves not normally needed, under recommended/normal use conditions. Not required under recommended/normal use conditions.
Respiratory protection:
9.
PHYSICAL AND CHEMICAL PROPERTIES
Auto ignition temperature:
Not applicable Not applicable
Boiling point:
Color:
Varies by product (multiple colors)
Density:
Not applicable Not applicable Not applicable Not applicable
Evaporation rate:
Flash point:
Melting point: Physical form:
Solid
pH:
Not applicable
Solubility/water:
Nil
Solubility/non-water
Not applicable Not applicable Not applicable Not applicable Not applicable Not applicable
Specific gravity: Vapor density: Vapor pressure:
Viscosity:
Volatile percent:
Page 3 of 5
10. STABILITY AND REACTIVITY
Stability:
Stable
Conditions to avoid: Materials to avoid:
None known None known
Hazardous polymerization:
This product, an article, does not release or otherwise result in any hazardous chemical exposure under recommended/normal use conditions.
Hazardous decomposition:
(see above)
11.
TOXICOLOGICAL INFORMATION
This product, an article, does not release or otherwise result in any hazardous chemical exposure under recommended/normal use conditions.
12. ECOLOGICAL INFORMATION
This product, an article, is expected to present a low, if any, risk to the environment, as (i) its use and disposal are unlikely to result in any significant release of components to the environment, or (ii) because those released components are expected to have only an insignificant impact on the environment.
13. DISPOSAL INFORMATION
The waste of this product should be disposed in accordance with local, regional, national and/or international regulations.
14. TRANSPORT INFORMATION
Not applicable (this product is not regulated per U.S. DOT, IATA or IMO)
15. REGULATORY INFORMATION
Chemical inventories:
These products are articles as per the Toxic Substance Control Act (TSCA) regulations, and therefore exempt from TSCA Inventory listing requirements.
U.S. Federal regulations:
Contact Intertape Polymer Group Contact Intertape Polymer Group Contact Intertape Polymer Group
State regulations:
International regulations:
Page 4 of 5
16. OTHER INFORMATION
National Fire Protection Association (NFPA) Hazard Classification Health: 0 Flammability: 1 Reactivity: 0
Special Hazards: None
The information in this Article Information Sheet is believed to be correct as of the date issued. Intertape Polymer Group (IPG) makes no warranties, expressed or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose or course of performance or usage of trade. The user is responsible for determining whether the IPG product is fit for a particular purpose and suitable for user’s method of use or application. Given the variety of factors that can affect the use and application of an IPG product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the IPG product to determine whether it is fit for a particular purpose and suitable for user’s method of use or application.
Page 5 of 5
Page 1 Page 2 Page 3 Page 4 Page 5Powered by FlippingBook