Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”. Unassembled Single Face Kits w/out Reveal - For Pan Form Faces CURRENT PRICE as of April 1, 2022
Flat S/F Body w/ Flat Bleed Rigid Retainer Part #2027 K2027/04 Part #2204
8-9/16”
Mill Finish
6 x 6 6 x 7 6 x 8 6 x 9 6 x 10 6 x 11 6 x 12 6 x 13 6 x 14 6 x 15 6 x 16 6 x 17 6 x 18 6 x 19 6 x 20 7 x 10 7 x 11 7 x 12 7 x 13 7 x 14 7 x 15 7 x 16 7 x 17 7 x 18 7 x 19 7 x 20 7 x 7 7 x 8 7 x 9 8 x 8 8 x 9 8 x 10 8 x 11 8 x 12 8 x 13 Size H’xW’
Mill Finish
Size H’xW’
Mill Finish
8 x 14 8 x 15 8 x 16 8 x 17 8 x 18 8 x 19 8 x 20 9 x 9 9 x 10 9 x 11 9 x 12 9 x 13 9 x 14 9 x 15 9 x 16 9 x 17 9 x 18 9 x 19 9 x 20 Size H’xW’ 10 x 10 10 x 11 10 x 12 10 x 13 10 x 14 10 x 15 10 x 16 10 x 17 10 x 18 10 x 19 10 x 20
Mill Finish
Size H’xW’
2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 9
4 x 4 4 x 5 4 x 6 4 x 7 4 x 8 4 x 9
$322 350 377 403 431 457 484 510 536 564 591 617 643 671 698 724 750 377 403 431 457 484 510 536 564 591 617 643 671 698 724 750 778
$431 457 484 510 536 564 591 617 643 671 698 724 750 778 805 484 510 536 564 591 617 643 671 698 724 750 778 805 831 536 564 591 617 643 671
$698 724 750 778 805 831 859 591 617 643 671 698 724 750 778 805 831 859 885 643 671 698 724 750 778 805 831 859 885 911
$245 270 296 322 350 377 403 431 457 484 510 536 564 591 617 643 671 698 270 296 322 350 377 403 431 457 484 510 536 564 591 617 643 671 698 724
4 x 10 4 x 11 4 x 12 4 x 13 4 x 14 4 x 15 4 x 16 4 x 17 4 x 18 4 x 19 4 x 20
2 x 10 2 x 11 2 x 12 2 x 13 2 x 14 2 x 15 2 x 16 2 x 17 2 x 18 2 x 19 2 x 20
5 x 5 5 x 6 5 x 7 5 x 8 5 x 9
3 x 3 3 x 4 3 x 5 3 x 6 3 x 7 3 x 8 3 x 9
5 x 10 5 x 11 5 x 12 5 x 13 5 x 14 5 x 15 5 x 16 5 x 17 5 x 18 5 x 19 5 x 20
3 x 10 3 x 11 3 x 12 3 x 13 3 x 14 3 x 15 3 x 16 3 x 17 3 x 18 3 x 19 3 x 20
Kits Include: ! Mill Finish
Kit Specifications: ! It is recommended to order kits 1” over nominal T12 or T8 lamp size to utilize .040 flat Aluminum Raceway Covers ! Custom size kits may be cut to any dimension Recommended Lamp Spacing: ! For illuminated backgrounds - 12” on center, using T12 or T8 lamps ! Always place lamps 3/4" from back of sign
Additional Information (pgs 196-197)
! Cut to size and mitered bodies ! Cut to size and mitered retainers ! All screws required to assemble by mechanical fastening ! All Corner Angles and/or Corner Keys required ! Face attachment hardware ! Packaging Not Included in Kits: ! Face or Back
! Electrical Components ! Back Braces and Gussets ! Mounting Provisions
Note: It is recommended to use safety chains and prop-bars on all hingeable faces.
93
Powered by FlippingBook