Signcomp Kit Pricing Guide 1.5

COMMERCIAL KITS CURRENT PRICE as of April 1, 2022

Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.

Unassembled Single Face Kits w/ Reveal - For Pan Form Faces

Single Face Body w/ Bleed Rigid Retainer Part #2025 KSF/48 Part #2048

8-5/16”

6 x 6 6 x 7 6 x 8 6 x 9 6 x 10 6 x 11 6 x 12 6 x 13 6 x 14 6 x 15 6 x 16 6 x 17 6 x 18 6 x 19 6 x 20 7 x 10 7 x 11 7 x 12 7 x 13 7 x 14 7 x 15 7 x 16 7 x 17 7 x 18 7 x 19 7 x 20 7 x 7 7 x 8 7 x 9 8 x 8 8 x 9 8 x 10 8 x 11 8 x 12 8 x 13 Size H’xW’

Mill Finish

Size H’xW’

8 x 14 8 x 15 8 x 16 8 x 17 8 x 18 8 x 19 8 x 20 9 x 9 9 x 10 9 x 11 9 x 12 9 x 13 9 x 14 9 x 15 9 x 16 9 x 17 9 x 18 9 x 19 9 x 20 Size H’xW’ 10 x 10 10 x 11 10 x 12 10 x 13 10 x 14 10 x 15 10 x 16 10 x 17 10 x 18 10 x 19 10 x 20

Size H’xW’

2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 9

4 x 4 4 x 5 4 x 6 4 x 7 4 x 8 4 x 9

$396 431 464 499 532 566 599 633 669 702 734 771 804 837 872 906 939 464 499 532 566 599 633 669 702 734 771 804 837 872 906 939 975

$532 566 599 633 669 702 734 771 804 837 872 906 939 975 1007 599 633 669 702 734 771 804 837 872 906 939 975 669 702 734 771 804 837 1007 1041

$872 906 939 975 1007 1041 1076

$294 330 364 396 431 464 499 534 566 599 633 669 702 734 771 804 837 872 330 364 396 431 464 499 532 566 599 633 669 702 734 771 804 837 872 906

4 x 10 4 x 11 4 x 12 4 x 13 4 x 14 4 x 15 4 x 16 4 x 17 4 x 18 4 x 19 4 x 20

2 x 10 2 x 11 2 x 12 2 x 13 2 x 14 2 x 15 2 x 16 2 x 17 2 x 18 2 x 19 2 x 20

734 771 804 837 872 906 939 975

1007 1041 1076 1110

5 x 5 5 x 6 5 x 7 5 x 8 5 x 9

3 x 3 3 x 4 3 x 5 3 x 6 3 x 7 3 x 8 3 x 9

804 837 872 906 939 975

5 x 10 5 x 11 5 x 12 5 x 13 5 x 14 5 x 15 5 x 16 5 x 17 5 x 18 5 x 19 5 x 20

3 x 10 3 x 11 3 x 12 3 x 13 3 x 14 3 x 15 3 x 16 3 x 17 3 x 18 3 x 19 3 x 20

1007 1041 1076 1110 1141

Additional Information (pgs 196-197)

Kits Include: ! Mill Finish

Optional Accessories (pg 127): ! Ballast Bracket(s) ! Raceway Covers and Cover Screws Kit Specifications: ! It is recommended to order kits 1” over nominal T12 or T8 lamp size to utilize .040 flat Aluminum Raceway Covers ! Custom size kits may be cut to any dimension Recommended Lamp Spacing: ! For illuminated backgrounds - 10” on center, using T12 or T8 lamps ! Always place lamps 3/4" from back of sign

! Cut to size and mitered bodies ! Cut to size and mitered retainers ! All screws required to assemble by mechanical fastening ! All Corner Angles and/or Corner Keys required ! Face attachment hardware ! Packaging Not Included in Kits: ! Face or Back ! Electrical Components ! Ballast Bracket(s) - See optional accessories ! Back Braces and Gussets ! Raceway Covers and Cover Screws - See optional accessories ! Mounting Provisions

Note: It is recommended to use safety chains and prop-bars on all hingeable faces.