Additional Information Kits
! Most profiles are available in cut to size kits ! Commercial bodies and retainers should be cut 1” longer than the nominal T12 or T8 lamp size for horizontal or vertical lamping ! Standard bodies and retainers should be cut 1-3/4" longer than the nominal T12 or T8 lamp size for horizontal or vertical lamping (The 6” D/F bodies and retainers should be cut 1” longer than the nominal T12 or T8 lamp size for horizontal or vertical lamping) ! EconoComp fillers and moldings should be cut 1” longer than the normal T12 or T8 lamp size for horizontal or vertical lamping ! General guidelines for lamp spacing: Double the distance between the front of the lamp and the back of the plastic face for your center to center lamp measurement. Maximum center to center is 12” ! Extrusion bodies, retainers, frames and covers are engineered for mechanical fastening, bonding with adhesive, or welded assembly ! It is recommended to use safety chains and prop-bars on all hingeable faces ! Assembly instructions available ! Mill Finish, Dk. Bronze or Clear Anodized ! Cut to size and mitered bodies ! Faces or Backs ! Electrical components ! Structural supports, Frame Support Tube, back braces, gussets and mounting provisions ! Attachment of Hinge ! Drilling of holes for locks and attachment of locks ! No prior surface preparation. Surface scratches, die lines and imperfections present. Not ready for paint ! Exposed aluminum surfaces are coated with Quaker Dark Bronze primer/topcoat ! Limited additional colors are available, minimum order will apply ! SignComp anodizes a mill finish product, therefore mill finish characteristics will be an integral part of the anodized product ! Die lines and imperfections may be seen but not felt on the finished product ! Cut to size and mitered retainers, frames and covers ! All Body Corner Angles and/or Corner Keys as required ! Packaging Included in Vandal System: ! Cut to size and mitered Inner Frame(s) ! Cut to size and mitered Outer Frame(s) ! Cut to size Hinge ! Locks ! All prices are effective as of February 1, 2022. Due to fluctuation in the raw aluminum market, prices are subject to change without notice ! Packaging is included in list prices ! For full length extrusion and hardware pricing see Product Guide
Included in Kits
Not Included in Kits
Mill Finish Dk. Bronze
Clear Anodized
Pricing
General Information
Return Policy ! Returns of SignComp products will not be accepted without prior authorization and written RMA number from SignComp ! Materials may not be returned for any reason other than defective product or incorrect fulfillment of order ! All goods to be returned must be acknowledged in writing within the 60 day grace period from the date of the shipment. Any claims after this period will be considered invalid ! All returned goods must be in new and saleable condition for full credit to be issued Additional Product Service Offerings ! Custom extrusions ! Mill Run extrusion orders ! Kerf Cutting Backorder Policy ! In the very unlikely event of a back order, the back order will be shipped freight prepaid only if the original order qualified for freight prepaid status ! Additional materials may be added to any back order, shipped freight prepaid with the additional freight expense the responsibility of the buyer ! Any expedited freight service requested by the buyer shall be at the expense of the buyer Remedies ! Provided that the warranty procedures are followed, the Company will repair and/or replace the defective SignComp product(s) during the applicable warranty period without charge for parts or labor ! Repair and/or replacement of defective SignComp products is your exclusive remedy under the Company's exclusive warranty ! The Company shall not be liable for any incidental or consequential damages if the Company's product is defective or does not conform to this exclusive warranty. In any event the maximum amount for which the Company shall be liable to the purchaser shall be the original purchase price of the defective SignComp product(s). ! Any claim for breach of this exclusive warranty shall be brought, if at all, no later than 30 days from the Company's breach Address for Notification ! Notice of a product defect covered by this exclusive warranty can be made in writing or by telephone. The Company's address and telephone numbers are: SignComp, LLC
Freight Policy ! Freight shall be prepaid, F.O.B. SignComp in Grand Rapids, Michigan for single orders of extrusion and/or accessories whereby the invoiced amount is $7,500.00 or more to any single destination within the continental United States or Canada ! Freight shall be collect, F.O.B. SignComp in Grand Rapids, Michigan for all orders other than as stated in this freight policy ! All freight claims for freight collect shipments are the sole responsibility of the buyer ! SignComp will assist with freight claims. Bill of ladings must be signed for as damaged ! Any requests for expedited freight services shall be the sole expense of the buyer Minimum Order ! Any single full length extrusion profile and/or prepackaged accessories ! Any single kit Standard Lead Times ! Full length extrusion and accessory orders ship within two (2) - three (3) days upon receipt and acceptance of purchase order ! Cut to size kits and cut extrusion orders ship within three (3) - four (4) days upon receipt and acceptance of purchase order ! All orders will receive an approximate ship date upon receipt and acceptance of purchase order and confirmation ! For custom kits and large quantities call Customer Service for lead times
Exclusive Warranty and Remedies ! In effect as of January 1, 2008
! This is the exclusive warranty policy of SignComp, LLC, Grand Rapids, Michigan 49544 (the "Company") with respect to any and all of its products Exclusive Warranty ! The Company warrants you as the original purchaser that the Company's products will be free from defects in materials and workmanship, under normal conditions, upon shipment of said products from the Company, for 30 days ! This exclusive warranty does not apply to damage caused by improper handling, therefore the company shall have no liability or responsibility for any damage whatsoever caused by handling ! The Company hereby disclaims any and all other warranties, including, without limitation, implied warranties of merchantability and fitness for a particular purpose. The only warranty with respect to the Company's products is described in this exclusive warranty. No oral or written representations shall extend the Company's exclusive warranty beyond that description herein. Warranty Procedures ! The purchaser must notify the Company of any warranty claim prior to initiating any remedy upon the defective product. Upon receipt of such notice, the Company will direct that an authorized representative inspect the product and, if necessary, correct the defect in accordance with this exclusive warranty. The Company shall have the exclusive right to determine whether or not a defect is covered by this exclusive warranty.
3032 Walker Ridge Dr. NW Grand Rapids, MI. 49544 Attention: Customer Service
Phone: (616) 784-0405 Toll Free: (877) 784-0405 Fax: (616) 784-0411 E-mail: signcomp@signcomp.com
197
Powered by FlippingBook