Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Additional Information
Extrusion Guidelines
Commercial
Size of Sign
Typically limited by the comfort factor for hinging the faces open for service Typically limited to approximately 64 square feet Typically limited by the comfort factor for hinging the faces open for service
Single Face Body . . . . . . . . . . . . Medium Body . . . . . . . . . . . . . . Wide Body . . . . . . . . . . . . . . . . . 1-1/2” Retainer . . . . . . . . . . . . . . 1-1/2” Retainer II . . . . . . . . . . . . Fascia Frames . . . . . . . . . . . . . . .
Typically limited to 32 square feet Typically limited to 60 square feet Typically limited to 6’ in height - unlimited length
Steel Support
Medium Body . . . . . . . . . . . . . . . . . . . . . . . . Wide Body . . . . . . . . . . . . . . . . . . . . . . . . . . . Flat 2 Piece Double Face Body . . . . . . . . . . . . Flat 2 Piece Double Face Medium Body . . . . . Flat Double Face Body . . . . . . . . . . . . . . . . . . Flat Double Face Medium Body . . . . . . . . . . .
Up to a 3” steel support Up to a 6” steel support Up to a 12” steel support Up to a 8” steel support Up to a 6” steel support Up to a 2” steel support
Architectural
Size of Sign
Typically limited by the comfort factor for hinging the faces open for service Typically limited to 60 square feet - Contact SignComp Engineering for larger applications
Series 7 & 12 Hinge Bodies . . . . Slide Retainer . . . . . . . . . . . . . . .
Steel Support
Series 7 Post & Panel Bodies . . . . . . . . . . . . . . Series 7 Hinge Body . . . . . . . . . . . . . . . . . . . . Series 12 Hinge Body . . . . . . . . . . . . . . . . . . .
Up to a 4” steel support Up to a 2-1/2” steel support Up to a 6” steel support
Standard
Size of Sign
1Part 2Part Bodies w/ Retainer Systems . . . . . . . . . .Typically limited to 72 square feet (can be larger with the proper use of internal support(s) and sufficient hanging bars)
Steel Support
1Part / 2Part 6” Double Face Body . . . . . . . . . 1Part / 2Part 9” Double Face Body . . . . . . . . . 1Part / 2Part 12” Double Face Body . . . . . . . .
Up to a 2” steel support Up to a 3” steel support Up to a 6” steel support
EconoComp
Size of Sign
Fillers w/ Molding Systems . . . . . Typically limited to 48 square feet - Contact SignComp Engineering for larger applications
Steel Support
Medium Double Face Filler . . . . . . . . . . . . . . Large Double Face Filler . . . . . . . . . . . . . . . . .
Up to a 1” steel support Up to a 4” steel support
Round, square or rectangular supports may be used. Do not exceed recommended max sizes.
Note: SignComp extrusions are engineered and designed to allow for a wide latitude of designs and applications. The fabrication techniques and material selection are at the sole discretion of the individual fabricator.
196
Powered by FlippingBook