ECONOCOMP
K I T S
Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Unassembled Single Face Kits - For Rigid Faces Single Face Filler w/ Extended Econo Molding
Part #2058
Part #2034 K2034/58
8”
Dk. Bronze
Dk. Bronze
Dk. Bronze
Size H’xW’
Mill Finish
2 x 2 2 x 2.5 2 x 3 2 x 3.5 Size H’xW’
Mill Finish
3 x 3 3 x 3.5 Size H’xW’
Mill Finish
Size H’xW’
Mill Finish
Dk. Bronze
$225 238 255 285 314 343 369 400 431 460 488 520 550 578 255 269 296 327 357 387 416 445
$124 162 201 238 280 316 353 389 428 467 507 544 581 618 657 162 182 201 218 238 258 294 336 372 409 447 485
$201 218 238 258 280 316 353 389 428 467 507 544 581 618 657 693 238 258 280 294 336 371 411 448 487 523
$285 314 343 369 400 431 460 488 520 550 578 607 343 369 400 431 460 488 520 550 400 431 460
$353 389 428 467 507 544 581 618 657 693 732 771 428 467 507 544 581 618 657 693 507 544 581
$166 181 195 209 225 255 285 314 343 369 400 431 460 488 520 550 195 209 225 238 269 296 327 357 387 416
1 x 1 1 x 2 1 x 3 1 x 4 1 x 5 1 x 6 1 x 7 1 x 8 1 x 9
$280 294 316 353 389 428 467 507 544 581 618 657 693 732 316 336 371 409 447 485 524 563
$106 135 166 195 225 255 285 314 343 369 400 431 460 488 520 135 152 166 181 195 209 238 269 297 327 357 387
4 x 4 4 x 5 4 x 6 4 x 7 4 x 8 4 x 9
3 x 4 3 x 5 3 x 6 3 x 7 3 x 8 3 x 9
2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 9
4 x 10 4 x 11 4 x 12 4 x 13 4 x 14 4 x 15
3 x 10 3 x 11 3 x 12 3 x 13 3 x 14 3 x 15 3.5 x 3.5 3.5 x 4 3.5 x 5 3.5 x 6 3.5 x 7 3.5 x 8 3.5 x 9 3.5 x 10
1 x 10 1 x 11 1 x 12 1 x 13 1 x 14 1 x 15 1.5 x 1.5 1.5 x 2 1.5 x 2.5 1.5 x 3 1.5 x 3.5 1.5 x 4 1.5 x 5 1.5 x 6 1.5 x 7 1.5 x 8 1.5 x 9 1.5 x 10
2 x 10 2 x 11 2 x 12 2 x 13 2 x 14 2 x 15 2.5 x 2.5 2.5 x 3 2.5 x 3.5 2.5 x 4 2.5 x 5 2.5 x 6 2.5 x 7 2.5 x 8 2.5 x 9 2.5 x 10
5 x 5 5 x 6 5 x 7 5 x 8 5 x 9
5 x 10 5 x 11 5 x 12
6 x 6 6 x 7 6 x 8
Divider Kits Include: ! Cut to size dividers ! Divider Corner Angles
Kits Include: ! Mill finish or Dk. Bronze ! Cut to size and mitered fillers ! Cut to size and mitered moldings ! All screws required to assemble by mechanical fastening ! All Corner Keys required ! Packaging Not Included in Kits: ! Face or Back ! Electrical Components ! Ballast Bracket(s) ! Back Braces and Gussets ! Raceway Covers and Cover Screws - See optional accessories ! Divider(s) - See optional accessories ! Mounting Provisions
Optional Accessories (pg 194): ! Raceway Covers and Cover Screws
! Divider(s) - (Extended Econo Molding is not engineered to directly integrate with the Econo Divider. Minimal additional assembly is required) Kit Specifications: ! It is recommended to order kits 1” over nominal T12 or T8 lamp size to utilize .040 flat Aluminum Raceway Covers ! Custom size kits may be cut to any dimension Recommended Lamp Spacing: ! For illuminated backgrounds - 10” on center, using T12 or T8 lamps ! Always place lamps 3/4” from back of sign
! All screws required to assemble by mechanical fastening ! 1-5/16” Econo Divider, Part #2140 , Mill Finish $5.15 and Dk. Bronze $6.66 per/ft per/face Additional Information (pgs 196-197)
191
Powered by FlippingBook