Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Unassembled Single Face Kits - For Rigid Faces
2Part 8” S/F Body w/ 2Part Extended Retainer Part #1927 K1927/1940 Part #1940
9”
One Side Removable w/ 2Part Extended Frame, Part #1955 2Part Retainer, Part #1944
Dk. Bronze
Dk. Bronze
Dk. Bronze
Size H’xW’
Mill Finish
Size H’xW’
Mill Finish
6 x 6 6 x 7 6 x 8 6 x 9 6 x 10 6 x 11 6 x 12 6 x 13 6 x 14 6 x 15 6 x 16 6 x 17 6 x 18 6 x 19 6 x 20 7 x 10 7 x 11 7 x 12 7 x 13 7 x 14 7 x 15 7 x 16 7 x 17 7 x 18 7 x 19 7 x 20 7 x 7 7 x 8 7 x 9 8 x 8 8 x 9 8 x 10 8 x 11 8 x 12 8 x 13 Size H’xW’
Mill Finish
8 x 14 8 x 15 8 x 16 8 x 17 8 x 18 8 x 19 8 x 20 9 x 9 9 x 10 9 x 11 9 x 12 9 x 13 9 x 14 9 x 15 9 x 16 9 x 17 9 x 18 9 x 19 9 x 20 Size H’xW’ 10 x 10 10 x 11 10 x 12 10 x 13 10 x 14 10 x 15 10 x 16 10 x 17 10 x 18 10 x 19 10 x 20
$1050 1095 1140 1184 1231 1275 1322 Mill Finish
Dk. Bronze
$415 460 507 550 597 642 688 730 777 822 866 913 957 1004 1047 1094 1138
2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 9
$280 322 368 415 460 507 550 595 641 685 730 777 822 866 912 956 1004 1047
4 x 4 4 x 5 4 x 6 4 x 7 4 x 8 4 x 9
$541 598 657 717 775 834 891 951 1010 1069 1129 1186 1245 1303 1363 1422 1479
$597 642 688 730 778 824 869 913 957 1004 1047 1095 1140 1184 1231
$775 834 891 951 1010 1069 1129 1186 1245 1303 1363 1422 1479 1538 1598 1011 1070 1130 1187 1246 1305 1365 1423 1481 1539 1601 1659 1011 1070 1130 1187 1246 1305 894 953
$1365 1423 1481 1539 1601 1659 1718 1130 1187 1246 1305 1365 1423 1481 1539 1601 1659 1718 1777 1246 1305 1365 1423 1481 1539 1601 1659 1718 1777 1835
$362 421 481 539 597 655 715 774 833 890 950 1009 1067 1127 1186 1245 1303 1363
4 x 10 4 x 11 4 x 12 4 x 13 4 x 14 4 x 15 4 x 16 4 x 17 4 x 18 4 x 19 4 x 20
2 x 10 2 x 11 2 x 12 2 x 13 2 x 14 2 x 15 2 x 16 2 x 17 2 x 18 2 x 19 2 x 20
869 915 959
1006 1050 1095 1140 1184 1233 1275 1322 1366 959 1006 1050 1095 1140 1186 1233 1275 1322 1366 1410
688 731 778 824 869 913 957
507 551 597 642 688 730 777 822 869 913 957
5 x 5 5 x 6 5 x 7 5 x 8 5 x 9
657 717 775 834 891 951
3 x 3 3 x 4 3 x 5 3 x 6 3 x 7 3 x 8 3 x 9
322 369 415 460 507 550 595 641 688 730 777 822 866 912 957
422 482 541 598 657 717 775 834 891 951
5 x 10 5 x 11 5 x 12 5 x 13 5 x 14 5 x 15 5 x 16 5 x 17 5 x 18 5 x 19 5 x 20
1004 1050 1095 1140 1184 1231 1274 778 824 869 913 957 1006
1010 1069 1129 1186 1245 1303 1363 1422 1479 1538
3 x 10 3 x 11 3 x 12 3 x 13 3 x 14 3 x 15 3 x 16 3 x 17 3 x 18 3 x 19 3 x 20
1004 1047 1094 1140 1184
1010 1069 1129 1186 1245 1303 1363 1422
1004 1047 1094
Kits Include: ! Mill Finish or Dk. Bronze ! Cut to size and mitered bodies ! Cut to size and mitered retainers (verticals pre-drilled and countersunk) ! One vertical side will be 2Part Extended Frame (1955) with 2Part Retainer (1944) to allow for sliding the rigid plastic face in and out ! All screws required to assemble by mechanical fastening ! All Corner Angles and/or Corner Keys required ! Packaging Not Included in Kits: ! Face or Back ! Electrical Components ! Ballast Pan(s) - See optional accessories ! Back Braces and Gussets ! Raceway Covers and Cover Screws - See optional accessories ! Divider(s) - See optional accessories ! Mounting Provisions
Divider Kits Include: ! Cut to size dividers ! Divider Corner Angles
Optional Accessories (pgs 182-183): ! Ballast Pan(s) ! Raceway Covers and Cover Screws ! Divider(s) Kit Specifications: ! It is recommended to order kits 1-3/4” over nominal T12 or T8 lamp size to utilize .040 flat Aluminum Raceway Covers ! Custom size kits may be cut to any dimension Recommended Lamp Spacing: ! For illuminated backgrounds - 12” on center, using T12 or T8 lamps ! Always place lamps 3/4" from back of sign
! All screws required to assemble by mechanical fastening ! 2Part Divider, Part #1905 , Mill Finish $5.94 and Dk. Bronze $7.71 per/ft per/face Additional Information (pgs 196-197)
161
Powered by FlippingBook