Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Unassembled Single Face Kits - For Rigid Faces
2Part 6” S/F Body w/ 2Part Extended Retainer Part #1926 K1926/1940 Part #1940
7”
One Side Removable w/ 2Part Extended Frame, Part #1955 2Part Retainer, Part #1944
Dk. Bronze
Dk. Bronze
Dk. Bronze
Size H’xW’
Mill Finish
Size H’xW’
Mill Finish
6 x 6 6 x 7 6 x 8 6 x 9 6 x 10 6 x 11 6 x 12 6 x 13 6 x 14 6 x 15 6 x 16 6 x 17 6 x 18 6 x 19 6 x 20 7 x 10 7 x 11 7 x 12 7 x 13 7 x 14 7 x 15 7 x 16 7 x 17 7 x 18 7 x 19 7 x 20 7 x 7 7 x 8 7 x 9 8 x 8 8 x 9 8 x 10 8 x 11 8 x 12 8 x 13 Size H’xW’
Mill Finish
8 x 14 8 x 15 8 x 16 8 x 17 8 x 18 8 x 19 8 x 20 9 x 9 9 x 10 9 x 11 9 x 12 9 x 13 9 x 14 9 x 15 9 x 16 9 x 17 9 x 18 9 x 19 9 x 20 Size H’xW’ 10 x 10 10 x 11 10 x 12 10 x 13 10 x 14 10 x 15 10 x 16 10 x 17 10 x 18 10 x 19 10 x 20
Mill Finish
Dk. Bronze
$520 560 599 641 681 720 756 797 837 876 916 956 995 1035 1073
2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 9
$242 285 322 364 400 441 483 520 560 599 639 678 718 756 797 836 875 915 285 322 364 403 441 483 520 560 599 639 678 718 756 797 837 875 915 954
$317 368 421 469 522 575 625 676 728 778 829 883 932 983 1037 1088 1137 1189
4 x 4 4 x 5 4 x 6 4 x 7 4 x 8 4 x 9
$364 403 441 483 520 560 599 641 678 718 756 797 837 876 915 954 995 443 483 520 560 599 641 681 718 756 797 837 876 916 954 995 1035
$471 522 575 626 678 728 780 832 883 934 985 1037 1088 1141 1189 1241 1295
$678 729 780 832 884 934 985 1038 1088 1141 1192 1241 1295 1346 1395
$916 956 998 1037 1073 1114 1153
$1192 1243 1295 1346 1397 1447 1500 987
4 x 10 4 x 11 4 x 12 4 x 13 4 x 14 4 x 15 4 x 16 4 x 17 4 x 18 4 x 19 4 x 20
2 x 10 2 x 11 2 x 12 2 x 13 2 x 14 2 x 15 2 x 16 2 x 17 2 x 18 2 x 19 2 x 20
758 800 839 876 916 956 998
1038 1089 1142 1192 1243 1296 1346 1397 1449 1500 1553 1089 1142 1192 1243 1296 1346 1397 1449 1501 1553 1604
1037 1076 1114 1153 1193
599 641 681 720 758 797 837 876 916 956 998
780 832 884 934 985
5 x 5 5 x 6 5 x 7 5 x 8 5 x 9
575 626 678 728 780 832 883 934 985
3 x 3 3 x 4 3 x 5 3 x 6 3 x 7 3 x 8 3 x 9
368 421 471 522 575 626 676 728 780 829 883 934 983
1038 1089 1141 1192 1243 1295 1346 1397 1447
839 878 916 956 998
5 x 10 5 x 11 5 x 12 5 x 13 5 x 14 5 x 15 5 x 16 5 x 17 5 x 18 5 x 19 5 x 20
3 x 10 3 x 11 3 x 12 3 x 13 3 x 14 3 x 15 3 x 16 3 x 17 3 x 18 3 x 19 3 x 20
1037 1076 1114 1153 1193 1235
1035 1073 1114
1037 1088 1141 1189 1241 1295 1346
681 720 758 800 837 876
884 935 985
1037 1088 1137 1189 1241
1038 1089 1141
Kits Include: ! Mill Finish or Dk. Bronze ! Cut to size and mitered bodies ! Cut to size and mitered retainers (verticals pre-drilled and countersunk) ! One vertical side will be 2Part Extended Frame (1955) with 2Part Retainer (1944) to allow for sliding the rigid plastic face in and out ! All screws required to assemble by mechanical fastening ! All Corner Angles and/or Corner Keys required ! Packaging Not Included in Kits: ! Face or Back ! Electrical Components ! Ballast Pan(s) - See optional accessories ! Back Braces and Gussets ! Raceway Covers and Cover Screws - See optional accessories ! Divider(s) - See optional accessories ! Mounting Provisions
Divider Kits Include: ! Cut to size dividers ! Divider Corner Angles
Optional Accessories (pgs 182-183): ! Ballast Pan(s) ! Raceway Covers and Cover Screws ! Divider(s) Kit Specifications: ! It is recommended to order kits 1-3/4” over nominal T12 or T8 lamp size to utilize .040 flat Aluminum Raceway Covers ! Custom size kits may be cut to any dimension Recommended Lamp Spacing: ! For illuminated backgrounds - 8” on center, using T12 or T8 lamps ! Always place lamps 3/4" from back of sign
! All screws required to assemble by mechanical fastening ! 2Part Divider, Part #1905 , Mill Finish $5.94 and Dk. Bronze $7.71 per/ft per/face Additional Information (pgs 196-197)
160
Powered by FlippingBook