Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Unassembled Series 7 Kits - For Rigid Faces Series 7 Single Face Hinge Body w/ Additional Retainer Options
Part #1602
7-1/4”
Beveled Part #1656 K1602/56 (8-3/4”)
Frameless Rigid Part #1628
Extended 1/4 Round Part #1650 K1602/50
K1602/28 (6-11/16”)
Mill Finish
Size H”xW” 30 x 30 30 x 36 30 x 48 30 x 60 30 x 72 30 x 84 30 x 96 30 x 108 30 x 120 36 x 36 36 x 48 36 x 60 36 x 72 36 x 84 36 x 96 36 x 108 36 x 120 36 x 132 36 x 144
Mill Finish
Size H”xW” 24 x 24 24 x 30 24 x 36 24 x 48 24 x 60 24 x 72 24 x 84 24 x 96 24 x 108 24 x 120
Mill Finish
Size H”xW” 48 x 48 48 x 60 48 x 72 48 x 84 48 x 96 48 x 108 48 x 120 48 x 132 48 x 144
Mill Finish
Size H”xW”
12 x 24 12 x 36 12 x 48 12 x 60 12 x 72 12 x 84 12 x 96 18 x 18 18 x 24 18 x 30 18 x 36 18 x 48 18 x 60 18 x 72 18 x 84 18 x 96
$236 294 352 404 460 514 569 236 265 294 322 377 431 487 539 598
$352 377 431 487 539 598 653 708 761 404 460 514 569 625 681 733 789 844 900
$514 569 625 681 733 789 844 900 956
$294 322 352 404 460 514 569 625 681 733
Kits Include: ! Mill finish ! Cut to size and mitered bodies ( Hinge Body is designed for welded assembly ) ! Cut to size and mitered retainers ( Extended 1/4 Round and Beveled Retainers are designed for welded assembly) ! All screws required to assemble by mechanical fastening ! All Corner Angles and/or Corner Keys required ! Packaging Not Included in Kits: ! Face or Back ! Electrical Components ! Ballast Bracket(s) - See optional accessories ! Back Braces and Gussets ! Raceway Covers and Cover Screws - See optional accessories ! Mounting Provisions
Optional Accessories (pg 150): ! Ballast Bracket(s) ! Raceway Covers and Cover Screws Kit Specifications:
Additional Information (pgs 196-197)
! It is recommended to order kits 1/2” (horizontal) or 3/4” (vertical) over nominal T12 or T8 lamp size to utilize .040 flat Aluminum Raceway Covers ! Custom size kits may be cut to any dimension Recommended Lamp Spacing: ! For illuminated backgrounds - 8”- 9” on center, using T12 or T8 lamps ! Always place lamps 3/4" from back of sign
Note: It is recommended to use safety chains and prop-bars on hingeable faces.
147
Powered by FlippingBook