Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Unassembled Series 12 Kits - For Rigid Faces Series 12 Hinge Body w/ Retainer Options
Part #1612
12”
1/4 Round End (Optional) Part #1671
One Side Removable w/ Slide Retainer, Part #1624 Access Frame, Part #1690 Slide Cover, Part #1694 *
**
Slide Part #1624 K1612/24
3/4” Slide Part #1626 K1612/26
Bleed Part #1632 K1612/32
Frameless Part #1631 K1612/31
1/4 Round Part #1640 K1612/40
Insert Part #1666 K1612/66/98
Without Ends
With Ends
Mill Finish
24 x 24 24 x 36 24 x 48 24 x 60 24 x 72 24 x 84 24 x 96 24 x 108 24 x 120 24 x 132 24 x 144 30 x 30 30 x 36 30 x 48 30 x 60 30 x 72 30 x 84 30 x 96 30 x 108 30 x 120 30 x 132 30 x 144 Size H”xW”
Mill Finish
36 x 36 36 x 48 36 x 60 36 x 72 36 x 84 36 x 96 36 x 108 36 x 120 36 x 132 36 x 144 48 x 48 48 x 60 48 x 72 48 x 84 48 x 96 48 x 108 48 x 120 48 x 132 48 x 144 60 x 60 60 x 72 60 x 84 60 x 96 60 x 108 60 x 120 60 x 132 60 x 144 Size H”xW”
Mill Finish
36 x 36 36 x 48 36 x 60 36 x 72 36 x 84 36 x 96 36 x 108 36 x 120 36 x 132 36 x 144 48 x 48 48 x 60 48 x 72 48 x 84 48 x 96 48 x 108 48 x 120 48 x 132 48 x 144 60 x 60 60 x 72 60 x 84 60 x 96 60 x 108 60 x 120 60 x 132 60 x 144 Size H”xW”
Mill Finish
24 x 24 24 x 36 24 x 48 24 x 60 24 x 72 24 x 84 24 x 96 24 x 108 24 x 120 24 x 132 24 x 144 30 x 30 30 x 36 30 x 48 30 x 60 30 x 72 30 x 84 30 x 96 30 x 108 30 x 120 30 x 132 30 x 144 Size H”xW”
$381 459 539 618 697 777 856 935 1014 1094 1173
$539 618 697 777 856 935 1014 1094 1173 1253
$574 653 729 811 888 969 1046 1129 1208 1290 1364
$797 876 954 1037 1116 1195 1272 1351 1432 1513 1025 1105 1181 1264 1343 1422 1500 1578 1660 1248 1330 1406 1488 1565 1647 1725 1806
697 777 856 935
457 496 579 658 738 816 896 976
685 774 805 884 963
1014 1094 1173 1253 1331
1042 1121 1201 1279 1362 1439
1055 1133 1213
856 935
1014 1094 1173 1253 1331 1413
Kits Include: ! Mill finish ! Cut to size and mitered bodies ( Hinge Body is designed for welded assembly ) ! Cut to size and mitered retainers ( Slide Retainers are pre- drilled and countersunk. Bleed Retainer , Frameless and 1/4 Round Retainers are designed for welded assembly) ! Slide Retainer - One vertical side will be *Access Frame (1690) and Slide Cover (1694) to allow for sliding the rigid plastic face in and out ! Access Frame available on all sides with cover options: Slide (1694), Radius (1695), Frameless (1693) and Bleed (1692) ! All screws required to assemble by mechanical fastening ! All Corner Angles and/or Corner Keys required ! Packaging
Kits w/ Ends Include: ! Four (4) cut to size 1/4 Round Ends and mounting angles ! Two (2) oversized caps with 1-1/4” Reveal Tab (Weld only) ! All screws required to assemble by mechanical fastening ! Additional 1/2 Round Ends - $41.00 per/ft per/end Not Included in Kits: ! Faces ! Electrical Components ! Ballast Bracket(s) - See optional accessories ! Internal Supports ! Raceway Covers and Cover Screws - See optional accessories ! Divider(s) - See optional accessories ! Mounting Provisions Optional Accessories (pg 150): ! Ballast Bracket(s) ! Raceway Covers and Cover Screws ! Divider(s)
Kit Specifications: ! It is recommended to order kits 1/2” (horizontal) or 3/4” (vertical) over nominal T12 or T8 lamp size to utilize .040 flat Aluminum Raceway Covers ! Custom size kits may be cut to any dimension Recommended Lamp Spacing: ! For illuminated backgrounds - 10” on center, using T12 or T8 lamps Divider Kits Include: ! Cut to size dividers ! Divider Tabs ! All screws required to assemble by mechanical fastening ! 1-1/4” Divider, Part #1662 , $5.81 per/ft per face ! For use with Slide Retainer Additional Information (pgs 196-197)
Note: It is recommended to use safety chains and prop-bars on hingeable faces.
**Call SignComp Customer Service for Insert Panel pricing
145
Powered by FlippingBook