Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
CURRENT PRICE as of April 1, 2022
Unassembled Series 7 Kits - For Rigid Faces Series 7 Single Face Hinge Body w/ Retainer Options
Part #1602
6”
*
1/4 Round End (Optional) Part #1671
One Side Removable w/ Slide Retainer, Part #1624 Access Frame, Part #1690 Slide Cover, Part #1694
**
Slide Part #1624 K1602/24
3/4” Slide Part #1626 K1602/26
Bleed Part #1632 K1602/32
Frameless Part #1631 K1602/31
1/4 Round Part #1640 K1602/40
Insert Part #1666 K1602/66/98
Without Ends
With Ends
Mill Finish
12 x 24 12 x 36 12 x 48 12 x 60 12 x 72 12 x 84 12 x 96 18 x 18 18 x 24 18 x 30 18 x 36 18 x 48 18 x 60 18 x 72 18 x 84 18 x 96 24 x 24 24 x 30 24 x 36 24 x 48 24 x 60 24 x 72 24 x 84 24 x 96 24 x 108 24 x 120 Size H”xW”
Mill Finish
30 x 30 30 x 36 30 x 48 30 x 60 30 x 72 30 x 84 30 x 96 30 x 108 30 x 120 36 x 36 36 x 48 36 x 60 36 x 72 36 x 84 36 x 96 36 x 108 36 x 120 36 x 132 36 x 144 48 x 48 48 x 60 48 x 72 48 x 84 48 x 96 48 x 108 48 x 120 48 x 132 48 x 144 Size H”xW”
Mill Finish
30 x 30 30 x 36 30 x 48 30 x 60 30 x 72 30 x 84 30 x 96 30 x 108 30 x 120 36 x 36 36 x 48 36 x 60 36 x 72 36 x 84 36 x 96 36 x 108 36 x 120 36 x 132 36 x 144 48 x 48 48 x 60 48 x 72 48 x 84 48 x 96 48 x 108 48 x 120 48 x 132 48 x 144 Size H”xW”
Mill Finish
12 x 24 12 x 36 12 x 48 12 x 60 12 x 72 12 x 84 12 x 96 18 x 18 18 x 24 18 x 30 18 x 36 18 x 48 18 x 60 18 x 72 18 x 84 18 x 96 24 x 24 24 x 30 24 x 36 24 x 48 24 x 60 24 x 72 24 x 84 24 x 96 24 x 108 24 x 120 Size H”xW”
$209 257 304 346 393 437 484 209 231 257 280 322 368 415 459 507 257 280 304 346 393 437 484 528 575 618
$304 322 368 415 459 507 551 598 642 346 393 437 484 528 575 618 666 709 756 437 484 528 575 618 666 709 756 801
$296 345 392 434 483 524 574 316 340 362 383 431 474 520 566 611 380 400 423 469 515 563 606 654 694 744
$443 464 511 554 601 643 692 738 783 502 548 594 641 688 730 777 824 867 915 627 673 720 765 811 856 902 948 991
Kits Include: ! Mill finish ! Cut to size and mitered bodies ( Hinge Body is designed for welded assembly ) ! Cut to size and mitered retainers ( Slide Retainers are pre- drilled and countersunk. Bleed Retainer , Frameless and 1/4 Round Retainers are designed for welded assembly) ! Slide Retainer - One vertical side will be *Access Frame (1690) and Slide Cover (1694) to allow for sliding the rigid plastic face in and out ! Access Frame available on all sides with cover options: Slide (1694), Radius (1695), Frameless (1693) and Bleed (1692) ! All screws required to assemble by mechanical fastening ! All Corner Angles and/or Corner Keys required ! Packaging
Kits w/ Ends Include: ! Two (2) cut to size 1/4 Round Ends and mounting angles ! Four (4) oversized caps (Weld only) ! All screws required to assemble by mechanical fastening ! Additional 1/4 Round Ends - $22.00 per/ft per/end Not Included in Kits: ! Face or Back ! Electrical Components ! Ballast Bracket(s) - See optional accessories ! Back Braces and Gussets ! Raceway Covers and Cover Screws - See optional accessories ! Divider(s) - See optional accessories ! Mounting Provisions Optional Accessories (pg 150): ! Ballast Bracket(s) ! Raceway Covers and Cover Screws ! Divider(s)
Kit Specifications: ! It is recommended to order kits 1/2” (horizontal) or 3/4” (vertical) over nominal T12 or T8 lamp size to utilize .040 flat Aluminum Raceway Covers ! Custom size kits may be cut to any dimension Recommended Lamp Spacing: ! For illuminated backgrounds - 8”- 9” on center, using T12 or T8 lamps ! Always place lamps 3/4" from back of sign Divider Kits Include: ! Cut to size dividers ! Divider Tabs ! All screws required to assemble by mechanical fastening ! 1-1/4” Divider, Part #1662 , $5.81 per/ft per/face ! For use with Slide Retainer Additional Information (pgs 196-197)
**Call SignComp Customer Service for Insert Panel pricing
Note: It is recommended to use safety chains and prop-bars on hingeable faces.
143
Powered by FlippingBook