Note: All dimensions are subject to the tolerance standards of the aluminum extrusion industry. Profile drawings are illustrative and rounded to the nearest 1/16”.
Flexible and Fabric Face Preparation Tension Clip and Flexible Face Requirements
Frame Type (Part # - Name)
Clip Line “DEDUCT” from trim size on all (4) four sides.
Clip Placement (on Center)
Tension Tool (Part #)
Face Trim Size “ADD” to overall Height and Width of the assembled frame.
6”
#2065 - Dual Frame
3”
1-1/2”
5135
5”
#2085 - Tension Frame
6”
1-1/2”
5135
5”
1-1/2”
5135
#2086 - Tension Frame II
6-1/2”
5”
2-1/4”
5137/5138
#2090 - Wall Mount Tension Frame
4-1/2”
5”
1-1/2”
5135
#2092 - Bleed Fascia Frame
6”
6”
1-1/2”
5135
#2094 - 1-1/2” Fascia Frame
3”
5”
#2103 - Flat Bleed Retro Frame w/ Reflector Slot
6-1/2”
1-1/2”
5135
5”
#2104 - Flat Bleed Retro Frame
6-1/2”
1-1/2”
5135
5”
#2105 - Bleed Retro Frame
6”
1-1/2”
5135
5”
#2107 - Flat Bleed Retro Frame II
7”
1-1/2”
5135
6”
#2112 - 2” Retro Frame
3”
1-1/2”
5135
5”
#2142 - Dual Divider
3”
1-1/2”
5135
5”
#2230 - Flat Bleed Double Face Tension Body #2233 - 6” Flat Bleed Single Face Tension Body
6-1/2”
1-1/2”
5135
5”
13”
1-1/2”
5135
Note : See the Tensioning Instructions for additional details.
Fabric Face Requirements Frame Type (Part # - Name)
Face Trim Size “ADD” to overall Height and Width of the assembled frame.
#3090N - 1-1/4” Soft Signage Tension Frame #3091N - 1-1/4” Soft Signage Snap Tension Frame
2”- 3”
2”- 3”
#3090 - 2” Soft Signage Tension Frame
2”- 3”
#3091 - 2” Soft Signage
2”- 3”
Snap Tension Frame
#3092 - 1-1/4” Front Load Soft Signage Frame
1”- 2”
#3095 - 3-1/2” Front Load Soft Signage Frame
1”- 2”
UL Recognized Component Systems The Underwriters Laboratory file number is E136850 R
129
Powered by FlippingBook