Weld-On 30 Effortlessly Bonds Dissimilar Materials and Bonds Metals with No Surface Prep Required Try the Structural Adhesive That Outperforms the Competition in Flexibility, Strength and Sag
Ideal for bonding dissimilar materials Bonds fast: in as little as 4 minutes Weld-On 30 10:1 TWO-COMPONENT STRUCTURAL ADHESIVE
Multiple working times
UL 746C approval for use in electrical equipment assemblies for indoor and outdoor signage applications Reduced bond line read through, reducing post finishing requirements Excellent fatigue, impact and environmental resistance properties No sag on non-level or vertical surfaces No surface treatment or primers required for most metals
Free SSF 52X 490 ML Applicator Gun with each case of Weld-On 30 purchased before 9/30/24.
For a Limited time
A Structural Adhesive You Can Count on From the Experts at Weld-On, the World’s Most Trusted Bond Weld-On 30 is among the most capable adhesives across various industries, including sign assembly and many others where high bond strength and resistance to extreme environmental conditions is critical. Combine that with it’s fast working and fixture times, as well as its ability to resist sagging on vertical surfaces and you have the perfect adhesive for whatever you’re putting together. Let us show you how Weld-On 30 can be put to use for you. Order Weld-On 30 Today Contact your Weld-On distributor or Rod Fleming at 317-650-5248 today. Offer Details This promotion ends September 30, 2024. Limit one gun (item number 185196) per case order of either Weld-On 30 or 31 490 ML cartridges. Not valid with any other offer or discount.
PRODUCT PROPERTIES (In Minutes) Cartridge Description Working Time
15 - 20 30 - 40 Fixture Time*
31125 WO30 490 ML
4 - 5
31127 WO31 490 ML 13 - 17
*Time to reach 80% of ultimate strength
RECOMMENDED FOR BONDING
Composites
Metals 1
Thermoplastics 2
Epoxy
Aluminum Acrylics/PMMA
Polyester/DCPD Cold Rolled Steel
PVC/CPVC
Vinyl Ester
Stainless Steel Coated Metals Uncoated Metals
FRP ABS
Gelcoats
Carbon Fiber
Available at
CERTIFICATIONS
NOTES: 1. Remove dust, loose scale, rust and other surface residue including oil and grease. 2. Polyolefins, thermoplastic polyesters, fluorocarbon plastics and other low surface energy plastics are generally not bondable with this product. Ask about a different low surface energy bonder for some applications.
UL 746C Approved
a brand of
IPS Adhesives 600 Ellis Road, Durham, NC 27703 USA | 877.477.4583 | Fax: 919-598-2439 | ipsadhesives.com
Page 1Powered by FlippingBook