Perforating Tool
The new Summa perforating tool for the F Series is used to make perforations in a very efficient and fast way. By using this tool, the perforated materials will be a lot easier to bend or fold. Then, the folds will have sharper 90° edges resulting in a nicer finish. This will save considerable time in the assembling of, for instance, cardboard or
polypropylene boxes. Strongest features
• Up to 25 times faster cutting of perforation lines (versus EOT tool) • Alternative for creasing. Folding and bending lines into cardboard • High-quality perforated cuts • Several knives available
Ideal for cutting: • Solid cardboard • Corrugated board • Polypropylene film
Knives 500-9890 | Perforation Knife 0.04 x 0.04 in. D 0.04 in. 500-9892 | Perforation Knife 0.12 x 0.12 in. D 0.16 in.
500-9891 | Perforation Knife 0.07 x 0.07 in.
D 0.0015 in. 500-9893 | Perforation 0.20 x 0.20 in. D 0.16 in.
Electronic Oscillating Tool | EOT
Ideal for cutting soft and medium density materials such as corrugated board and foam up to 0.71 in. thick. The Electronic Oscillating Tool is driven by an electric motor, producing up to 12,000 rpm and moves a knife up and down over a stroke of 1 mm. Strongest features • Powerful cutting tool • High processing speeds Blades
500-9800 - EOT L25 Knife 65 o Max cutting thickness (with gliding disk) - 0.20 in. Max cutting thickness (without gliding disk) - 0.20 in.
• Low maintenance Ideal for cutting: • Corrugated B-C-E Flute (0.06 - 0.16 pulg.) • Foamcore with paper liner <= 0.40 in. • Foamcore with pa- per liner > 0.20 in. • Honeycomb board < 0.40 in. • Gasket
500-9810 - EOT L25 Knife 65 o - 80 o Max cutting thickness (with gliding disk) - 0.20 in. Max cutting thickness (without gliding disk) - 0.43 in.
500-9811 - EOT L25 Knife 65 o - 85 o Max cutting thickness (with gliding disk) - 0.20 in. Max cutting thickness (without gliding disk) - 0.43 in.
500-9815 -EOT L33 Knife 45 o - 85 o Max cutting thickness (with gliding disk) - 0.51 in. Max cutting thickness (without gliding disk) - 0.75 in.
500-9813 - EOT L25 Knife 0 o - 75 o Max cutting thickness (with gliding disk) - 0.43 in. Max cutting thickness (without gliding disk) - 0.43 in.
500-9814 -EOT L38 Knife 45 o - 86 o Max cutting thickness (with gliding disk) - 0.71 in. Max cutting thickness (without gliding disk) - 0.95 in.
500-9812 - EOT L28 Knife 65 o - 85 o Max cutting thickness (with gliding disk) - 0.31 in. Max cutting thickness (without gliding disk) - 0.55 in.
Powered by FlippingBook