Kiss-Cut Tool
With mechanically-controlled knife pressure, this tool is specifically designed for kiss-cutting material down to its liner up to 0.05 in thick. This tool also includes an adjustable nose piece for precise depth control.
Blades
Strongest features • Precise depth control • Clean cuts for easy weeding • Cuts a wide variety of vinyl and film Ideal for cutting: • Paper < 200g • Adhesive vinyl • Sandblast material • Window film • Magnetic material • Adhesive PVC Banner material
390-534 - Tangential Knife 36 o Max cutting thickness - 0.01 in.
390-550 - Tangential Knife 60 o Max cutting thickness - 0.05 in.
390-551 - Tangential Double Tip Knife 36 o Max cutting thickness - 0.01 in.
390-560 - Tangential Knife 45 o wedge 40/25° Max cutting thickness - 0.04 in.
Single Edge Cutout Tool
The Single Edge Cutout Tool is designed for detailed cutting through materials up to 0.24 in. thick. A spring-loaded gliding disk allows cutting of very precise details and can be fixed at a set depth.
Blades
Strongest features • Precise cutting of details • Cuts material up to 0.24 in. thick • Fixed depth setting
500-9801 - Single Edge Cutout Knife 65° Max cutting thickness (with gliding disk) - 0.24 in. Max cutting thickness (without gliding disk) - 0.24 in.
Ideal for cutting: • Paper < 200 gr • Cardboard 300-500 gr • Adhesive vinyl • Foamboard <= 0.08 in
• Polypropelene <= 0.05 in • Polycarbonate <= 0.02 in • Adhesive PVC • Magnetic material
Bevel Cut Tool New
With its short, stable knife, the bevel cut tool is perfect for cutting V-shaped grooves into stiffer materials, such as deco felt, and rubber. The tool also excels at creating flawless folding lines in solid board. When used for cutting packaging, the tool imparts a quality appearance to luxury packaging.
Strongest features • Can cut through materials at a 45° angle • Can cut through hard or tougher materials • Able to cut curves
Blades
500-9827 - Bevel cut knife
Ideal for cutting: • Deco felt • Rubber • Solid board
• Soft foam boards • Sandwich boards • Corrugated cardboards
Powered by FlippingBook