Specifications
Material: Posts are produced from standard “T” rails weighing 91 lbs/yd or more according to ASTM A499-15, Grade 60.
Bolts: Hex head, integral flanged lock nut or standard Grade 8 hex head bolt and lockwasher.
Nuts: 5/16" - 18 UNC hex head, integral flange conforming to ASTM A563, Grade DH.
Lengths: Available in 6ft, 7ft, 8ft, 10ft, 11ft, and 12ft lengths. Special lengths also available.
Lockwashers: 3/8” heavy duty external type.
Finish: Base posts and sign posts are finished with either a baked enamel paint or galvanized per ASTM A123 or powder coated. Sign Post: The weight of each sign post before punching is 2.00 to 4.00 lbs/ft. The sign post is punched with .375" diameter holes on 1.0" centers, full length. The first hole and last hole are 1.0" from the end of post. Special punching is available. Eze-Erect Hardware Retainer-Spacer Strap: 17.125” long X 1.00" wide x.375" thick with .375" offset. The strap is galvanized to ASTM A123
Bolts, Nuts and Lockwashers are cadmium or zinc plated for corrosion resistance. Base-Bolted Hardware Spacers: 1.0" diameter x .625" thick with .438" hole with an elastomer insert. The spacers are zinc plated for corrosion resistance.
Bolts: Hex head, fully threaded Grade 9,5/16" - 18 UNC x 2.25"
Washers: 5/16" Grade 8
Nuts: Hex head, integral flanged lock nut or standard Grade 9 hex head bolt and lockwasher.
Bolts, Nuts and Washers are cadmium or zinc plated for corrosion resistance.
Delineator Posts
* ± 5% + Governing Section
888.437.3726 | Sales@FranklinIndustriesCo.com | FranklinIndustriesCo.com
Powered by FlippingBook