Application Surface Preparation: Remove grease, loose contamination or poorly adhering oxides from metal surfaces. Normal amounts of mill oils and drawing compounds usually do not present a problem in adhesion. Most plastics require a simple cleaning before bonding. Some may require abrading for optimum performance.
Technical Data*
Accessories
Product
Mix Ratio
Dispansing Gun
Mixing Tip
Work Time Handling Time Full Cure
Color
Size
3029937 3029936 3029937 3029936 3029937 3029936 3029937 3029936 3029937 3029936
LORD Signlok 403
2-4 minutes
4-6 minutes
24 hours
2:1
Tan
210 mL
3001173
LORD Signlok 406
6-10 minutes
12-17 minutes
24 hours
2:1
Tan
210 mL
3001173
LORD Signlok 810
8-12 minutes 20-25 minutes
24 hours
2:1
Dark Grey
210 mL
3001173
LORD Signlok 204
4-6 minutes
22-26 minutes
24 hours
2:1
Tan
210 mL
3001173
Optically Clear
LORD Signlok 7550 3-5 minutes
1 hour
72 hours
1:1
210 mL
3001173
*Technical data reported at 70-77°F (21-25°C). Data is typical and not to be used for specification purposes.
Parker Lord Engineered Materials Group 111 LORD Drive Cary, NC 27511-7923 USA
phone +1 877 275-5673 www.parker.com/APS
PB8209
OD
07/25 Rev.5
Information and specifications subject to change without notice and without liability therefor. Trademarks used herein are the property of their respective owners.
© 2025 Parker Hannifin Corporation
Powered by FlippingBook