PRODUCT BENEFITS
Working Time (min)
Fixture Time (min)
Packaging Types
Ratio
Benefits
Product
Less visible read-through of the adhesive bond lines High-strength permanent structural assemble of metal and plastic parts Glass beads aid in maintaining bond line thickness Elimination of welding, riveting and mechanical fasteners Fast curing allows for quicker assembly times Versatility in bonding a multitude of substrates Cured adhesive is sandable and paintable Elimination of welding, riveting and mechanical fasteners Versatility in bonding a multitude of substrates Cured adhesive is sandable and paintable 10 to 1 ported mixers dramatically reduce cross- contamination and clogging of cartridges Elimination of welding, riveting and mechanical fasteners Versatility in bonding a multitude of substrates Cured adhesive is sandable and paintable 10 to 1 ported mixers dramatically reduce cross- contamination and clogging of cartridges Elimination of welding, riveting and mechanical fasteners Sets up to handling strength in 10 to 12 minutes No need for mixing equipment, wheelbarrows, or water Compressive strength similar to concrete Easier to remove from the ground when excavated. Stainless steel bonded studs have much higher strength than spot-welded aluminum studs Patented No Slide AT-8040 formulation holds the studs vertically in place during curing Bonded wire tie mounts are much stronger than sticky- backed standard wire tie mounts. Outer surfaces of pre-painted post panel faces do not have to be re-painted Fine mist spray Light color; no staining Multipurpose mist spray adhesive Ideal for bonding lightweight materials like decorative film, vinyl, foil, gasket, fabric, foam, label, or cardboard to metal, plastic, or wood surfaces.
Vibra-TITE MP-55300 NB GB ®
1:1
6- 8
15-25
50ml 400ml 10-gallon kits
®
50ml 400ml 10-gallon kits
Vibra-TITE MP-55305
1:1
2-3
5-6
50ml 380ml 490ml 5 gallons
Vibra-TITE MP-55320
10:1
12-13
23-35
®
50ml 380ml 490ml 5 gallons
Vibra-TITE MP-55420
10:1
4-6
8-13
®
2.4 lb. bags
Fast Post Anchor
30 seconds to 1 minute
10-12
50ml
Weld Mount
6 to 8
10-15
12.2 wt. oz aerosol can
HP-700
15
California compliant High temp. resistance (up to 240°F) High performance web spray adhesive
12.2 wt. oz aerosol can
HP-2000
30
Permanently bonds most substrates including metals, plastics, wood, laminates, foil, rubber, FRP, low energy plastics, rubber, and foam
IMPORTANT: The information contained herein is believed to be correct to the best of our knowledge. However the recommendations and suggestions herein are made without guarantee or representation as to results. It is the purchaser’s responsibility to test and determine the suitability of the product for the purchaser’s intended use and purpose. Purchaser assumes all risk and liability whatsoever regarding such suitability. Any product samples provided for testing are provided in accordance with standard limited warranties as stated on our technical data sheets.
Unless otherwise noted, trademarks are property of H.B. Fuller Company or one of its affiliated entities. © H.B. Fuller Company, 2025
For more information, visit www.hbfuller.com
Powered by FlippingBook