Vibra-TITE ® Professional-Grade MMAs H.B. Fuller’s MMAs offer a less exothermic cure, which minimizes the risk of potential cracking in the substrates, especially with plastic joints. Our range of MMAs delivers high-strength bonding across a wide variety of material combinations, including the ability to bond two or more of the same, similar and dissi- milar substrates. DURABLE ASSEMBLY
Color Key
OUR MMA PRODUCT LINE
Product Name
Standard Sizes
Viscosity Part A
Viscosity Part B (cPs)
Mix Ratio
Fixture Time
Tensile Strength
Lap Shear Carbon Steel
Lap Shear Aluminum
Key Property
Open Time
High strength, low elongation and good impact resistance High strength, low elongation and good impact resistance High strength and low elongation. Works well on Galvanized steel High strength and good elongation. Good resistance to outdoor environment conditions. High strength and low elongation. Works well on Galvanized steel
10-15 Mins
3625 to 5075 psi 3625 to 5075 psi 4350 to 5800 psi 2175 to 4350 psi 3190 to 4640 psi 1900 to 2300 psi 3190 to 4640 psi
50ml, 400ml, 5 gal pail
MP-55300
60,000
60,000
1 to 1
4-6 Mins
3100 to 3900 psi
2450 psi
50ml, 400ml, 5 gal pail
MP-55305
60,000
60,000
1 to 1
2-3 Mins
5-6 Mins
3100 to 3900 psi
2450 psi
50ml, 400ml, 5 gal pail
20-35 mins 20-30 Mins 60-90 Mins
MP-55310
60,000
60,000
1 to 1
8-12 Mins
3200 to 4000 psi
3700 psi
50ml, 490ml, 5 gal pail
MP-55320
130,000
50,000
10 to 1 8-14 Mins
2800 to 3500 psi
3700 psi
50ml, 400ml, 5 gal pail 50ml, 400ml, 5 gal pail 50ml, 490ml, 5 gal pail
MP-55350
70,000
50,000
1 to 1
20-40 Mins
2500 to 3500 psi
2350 psi
200-300 Mins
Long Open time and high Elongation
MP-55360 HV
200,000
160,000
1 to 1
40-50 Mins
1700 to 2300 psi
1700 to 2300 psi
High strength and good elongation. Good resistance to outdoor environment conditions. Low Odor and non Flamable applications. Outstanding bond strength and extremely durable. High temperature and chemical resistance. Highly resistant to environment conditions Low surface energy bonder with wide range of applications.
8-13 Mins
MP-55420
130,000
50,000
10 to 1 4-6 Mins
3100 to 3900 psi
3300 psi
50ml, 490ml, 5 gal pail
MP-58420
140,000
50,000
10 to 1 7-9 Mins
24 Hours -
2400 to 2600 psi
2400 to 2600 psi
50ml, 490ml, 5 gal pail
35-40 Mins
3190 to 4640 psi
MP-55422
130,000
50,000
10 to 1 17-24 Mins
2500 psi
2500 psi
50ml, 400ml, 5 gal pail
20-120 Mins
1391 psi (polypropylene)
PB500
100,000
50,000
1 to 1
4-5 Mins
-
1122 psi (HDPE)
Note: Colors and Modification available. Please ask your sales rep about availability for each product. Find these products and more at www.hbfullerproducts.com
IMPORTANT: The information contained herein is believed to be correct to the best of our knowledge. However the recommendations and suggestions herein are made without guarantee or representation as to results. It is the purchaser’s responsibility to test and determine the suitability of the product for the purchaser’s intended use and purpose. Purchaser assumes all risk and liability whatsoever regarding such suitability. Any product samples provided for testing are provided in accordance with standard limited warranties as stated on our technical data sheets. Unless otherwise noted, trademarks are property of H.B. Fuller Company or one of its affiliated entities. © H.B. Fuller Company, 2025
Page 1Powered by FlippingBook